User Manual

(Supplement) – Cell phone package for Passat Sedan, Model year 2006
6 Cell phone package
Ending Bluetooth
®
connection
– Press the appropriate key on the cell phone. Read the User's Guide from the cell
phone manufacturer for the correct procedure. Or
– Remove the ignition key and take the cell phone out of the cradle.
Establishing connection to the cell phone package with an already
recognized Bluetooth
®
device
– Switch the ignition on or place the cell phone in the cradle.
– The cell phone package automatically detects the cell phone as a recognized de-
vice. The Bluetooth
®
connection is established.
– A beep over the vehicle loudspeakers confirms that the cell phone package is
working.
Deleting the list of all recognized devices from the cell phone package
– Switch the ignition on.
– If necessary, end all active Bluetooth
®
connections.
– Make sure that there is no recognized cell phone within Bluetooth
®
range.
– Hold the - button on the multi-function steering wheel down longer than fif-
teen seconds or press the emergency call button on the cradle longer than fifteen
seconds.
– A beep confirms the deletion.
Up to seven different Bluetooth
®
enabled cell phones can be stored as recognized in the vehicle cell
phone package. If an additional device is linked to the cell phone package, authentication to the device
that has not been used for the longest period of time is automatically deleted.
Note
Not all (Bluetooth
®
capable) cell phones will connect to the cell phone package. (Please consult your
dealer for a list of compatible phones and available cradles.)
Tips
• The linking process as well as Bluetooth
®
settings in the cell phone package are only available when
the vehicle is not moving.
• When establishing a connection automatically through Bluetooth
®
, the cell phone package looks for
recognized devices within its operating range. If there should be several previously recognized cell
phones within Bluetooth
®
range, the device last connected is given priority. It does not necessarily have to
be the cell phone in the cradle for the recognition and connection to occur.
• Connecting a cell phone to a cell phone package makes the cell phone package invisible to other
Bluetooth
®
devices, i.e. other cell phones cannot be paired or connected to it.
• Ensure the Bluetooth
®
- Authorization required - setting on your cell phone is set to ‘NO’ in order to
allow automatic reconnection. Please refer to the User's Guide of your cell phone manufacturer.
• When Bluetooth
®
devices have been paired or have “gotten to know” each other once, the Bluetooth
®
setting “Visible to All” is no longer needed. The phone package in your vehicle switches its visibility off