User Guide Microsoft Screen Sharing for Lumia Phones (HD-10) Issue 1 EN
User Guide Microsoft Screen Sharing for Lumia Phones (HD-10) Contents Safety 3 About your accessory 4 Keys and parts 5 Connect your adapter to the TV and the power supply 6 Connect your adapter with your phone or tablet 7 Restore the factory settings 8 Update your adapter software 9 Product and safety info 10 Copyrights and other notices 11 12 © 2014 Microsoft Mobile. All rights reserved.
Safety Read these simple guidelines. Not following them may be dangerous or illegal. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. QUALIFIED SERVICE Only qualified personnel may install or repair this product. BATTERIES, CHARGERS, AND OTHER ACCESSORIES Use only batteries, chargers, and other accessories approved by Microsoft Mobile for use with this device. Do not connect incompatible products. KEEP YOUR DEVICE DRY Your device is not water-resistant.
About your accessory With this adapter, you can view the screen of your phone or tablet on your TV or monitor. Connect the adapter to an HDMI-compatible TV, and you can see the content on your phone or tablet mirrored on the TV screen. To use the adapter, you need a Lumia device with screen projection or wireless display, or a Wi-Fi CERTIFIED Miracast™ source device. NFC only works with Lumia phones. For more info on compatibility, support, software downloads, and troubleshooting, go to www.nokia.
Keys and parts Get to know your device. 1 2 3 4 5 6 Micro-USB charger connector Reset pinhole NFC area Detachable NFC disc HDMI cable connector Indicator light This product does not include an HDMI cable. The surface of this product is nickelfree. Read this user guide carefully before using the product. Also, read the user guide for the device that you connect to the product. © 2014 Microsoft Mobile. All rights reserved.
Connect your adapter to the TV and the power supply Connect an HDMI cable and plug in the power supply to get started. 1. Connect one end of an HDMI cable to the HDMI port of the adapter, and the other end to the TV. 2. Connect the charger to the adapter, and plug the charger into a wall outlet. 3. Make sure your TV is switched on, and that the correct input mode is selected. When you see the Start mirroring screen with instructions, you’re ready to connect the adapter to your phone.
Connect your adapter with your phone or tablet To get started on mirroring content from your phone, connect your adapter to your phone using NFC. 1. Make sure you've switched on NFC on your phone. 2. Touch the NFC areas of the 2 devices together. 3. In the project my screen view on your phone, tap Screen Sharing. 4. To stop mirroring content, touch the NFC areas together again, and tap Screen Sharing again in the project my screen view.
Restore the factory settings If you want to clear all the previous connections to other devices and restore the factory settings, reset your adapter. You can also try resetting if there’s a problem with connecting the adapter to a device. Make sure your adapter is connected to a TV and a power supply. 1. Wait until the Start mirroring screen is visible on the TV screen. 2. With the end of a paperclip or similar tool, press the reset button in the reset pinhole for 5 seconds.
Update your adapter software You need a USB flash drive and a USB Y-cable. The Y-cable must have suitable connectors to connect your adapter to the flash drive and a power supply (a charger or a computer). 1. Connect the USB flash drive to a computer. 2. Go to the adapter’s support website, download the HD-10 software update file, and save it in the main folder of the flash drive. 3. Connect your adapter to a TV with an HDMI cable. 4.
Product and safety info Take care of your device Handle your device, charger and accessories with care. The following suggestions help you keep your device operational. • • • • • • • • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, let the device dry. Do not use or store the device in dusty or dirty areas. Do not store the device in high temperatures. High temperatures may damage the device.
conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Your device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. This device has been evaluated for compliance with those RF exposure limits at 20 cm from body.
HDMI and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC. Wi-Fi CERTIFIED® Logo is a certification mark of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™ is a trademark of Wi-Fi Alliance. This product contains open-source software. To view the applicable copyright and other notices, permissions, and acknowledgements, quickly press the reset button in the reset pinhole with the end of a paperclip or similar tool, when the Start mirroring screen is visible.
Microsoft Screen Sharing for Lumia Phones (HD-10) Conecte el adaptador al TV y a la fuente de alimentación. 1. Conecte un extremo de un cable HDMI al puerto HDMI del adaptador y el otro extremo al TV. 2. Conecte el cargador al adaptador y enchufe el cargador a un tomacorriente de pared. 3. Asegúrese de que el TV esté encendido y de que el modo de entrada correcto esté seleccionado. Cuando vea la pantalla Start mirroring con instrucciones, estará listo para conectar el adaptador al teléfono.
por las agencias gubernamentales competentes. Para obtener más información sobre los atributos medioambientales del dispositivo, consulte www.nokia.com/ecoprofile (en inglés). Información de baterías y cargadores Cargue su dispositivo con un cargador AC-20 o AC-60. El tipo de enchufe del cargador puede variar. Es posible que Microsoft Mobile tenga disponibles modelos de batería o cargadores adicionales para este dispositivo.
