User Guide

the mouse goes into pairing mode, then the second light will blink slowly.
Note: If you’re pairing a third device, the third light will blink.
3. When the second pairing light is blinking slowly, follow these steps to connect a
Bluetooth device.
After you set up Smart Switch, press the Bluetooth Pairing button on the mouse once to
quickly switch from one device to another.
Switch between devices using Smart Switch
With your devices paired, you can use Surface Precision Mouse to switch between up to
three of your devices by moving your mouse cursor to the edge of your screen. Here’s how
to set it up in Mouse and Keyboard Center.
Notes:
 You need to pair all your devices before you can set up Smart Switch.
 Install Mouse and Keyboard Center on all the devices you want to use with Smart
Switch.
1. Open Mouse and Keyboard Center on one of the devices that Surface Precision Mouse
is paired with, and then select Smart Switch.
2. Slide the Enable Smart Switch bar to On. You’ll see a list of the devices that are paired
with your mouse, in the order they were paired.
3. Review the available settings to customize Smart Switch.
Charge Surface Precision Mouse
When the light on the top of the mouse blinks red, use the USB cable that came with the
mouse to recharge the battery. You can keep using Surface Precision Mouse while it
charges.
To check the battery level, go to Mouse and Keyboard Center.