User Guide

1.
Pairing lights
2.
Pairing button
With Surface Precision Mouse, you can pair up to three different devices and quickly switch
between them without having to stop and re-pair each time. Here’s how:
Pair a single device:
1. Press and hold the pairing button on the bottom of the mouse for 5-7 seconds, then let
the button go. There are three pairing lights, one for each of the devices you can pair
the mouse with. All three pairing lights will blink once when the mouse goes into
pairing mode, then the first light will blink slowly.
2. Once the first pairing light is blinking, follow these steps to connect a Bluetooth
device. You can pair up to two more devices with your mouse.
Pair with more devices:
1. Press the pairing button on the bottom of the mouse to select a second device and
then release it. The second pairing light on the bottom of the mouse will blink quickly.
Note: To pair the mouse with a third device, press the pairing button on the bottom of
the mouse twice until the third pairing light is blinking quickly.
2. Once the second light is blinking quickly, press and hold the pairing button on the
bottom of the mouse and then release it. All three pairing lights will blink once when