Owner`s manual

AMI International, Inc.
Complete the installation by clicking Finish. Connect and proceed to
the next installation.
Click on
Next to continue
Verify the folder or make changes to the folder and click on
Next
Complete the installation by clicking Close
Your driver installation is now complete.
※ Powering on AMI MUSIK DS5:
Connect the supplied 5V DC adaptor power supply to the AMI MUSIK
DS5 and connect to your PC using the supplied USB cable. Push the vol-
ume button for approximately 1 second. The LED indicators at the front
panel will illuminate for unit initialization. After initialization, the AMI
MUSIK DS5 will be ready for use. The quad level LED indicators shows
will first show the current volume setting and then, the current sample
rate.
After installation of the driver package, Windows automatically starts
Found New Hardware Wizard.
Click on No, not this time and Click Next to continue.