Network Media Player Owner's Manual

DS5 User Guide
9. Fasten the screws to mount the bridge
board to the heat sink.
11. Fasten the screws.
12. Align the top cover with the body and
push lightly into place.
10. Place the assembled drive back in the
plastic framing and connect the cables.
Note: Be careful not to damage any cables or components during the installation!
Remark: Only use the wireless kit designed for the DS5. We do not support 3
rd
party PCI
cards and installation of any other components will void the warranty.
Page 17 / Chapter 2 - Hardware Installation