Installation Instructions

■ Wireless HF Unit HF-1W

1. Speaker

2. Mic

3. Remote

4. DC

5. Internal bluetooth

antenna

The HF-1W is used in a fixed car installation and it offers a wireless

handsfree function and a wireless connection to compatible external

devices.

The HF-1W unit is attached to the vehicle interior using the mounting

plate HH-1. HF-1W is secured to HH-1 with a screw (included with

HH-1). Power is supplied to DC socket from the vehicle's battery via the

power cable CA-7P.

The HF microphone HFM-8, connects to the MIC socket. And the HF

speaker HFS-12, connects to the SPEAKER socket.

The HF-1W is always connected to a car battery. To save the car battery

the HF-1W goes to a sleep mode. Sleep mode is activated when the

ignition is turned off and there is no active call.

■ Installation

After tightening the HH-1 screws, secure HF-1W installation to the HH-

1 mounting plate with the screw going through HF-1W. The Nokia logo

lid is placed on the HF-1W to cover the recess.

Do not install the HF-1W unit in a metal casing (or similar location) that

can prevent the unit from transmitting radio frequencies. Aim the

internal Bluetooth antenna (see picture) towards the user (Bluetooth

phone).

■ Mounting Plate HH-1

HH-1 is a fixed position mounting plate. It is used to attach Wireless

HF Unit (HF-1W) to the vehicle.

CK-IW IG_en1.fm Page 5 Tuesday, February 25, 2003 9:57 AM