User Manual

LRB-1 Nokia Bluetooth Tranceiver Component
- Preliminary Information -


April 2001 Confidential 3/11
Overview
The LRB-1 Nokia Bluetooth Tranceiver Component is a highly integrated multi-chip component which
represents a complete standalone Bluetooth transceiver system for short-range wireless applications. All
necessary components including the baseband controller, the radio part for the 2.45 GHz system and a
flash memory of 2 MBit are integrated on a single PCB using advanced flip chip interconnection
techniques. The Bluetooth Tranceiver Component is delivered with all needed firmware of the Bluetooth
protocol stack up to HCI which resides in the on-board flash memory. A traditional high-IF radio
architecture providing good sensitivity has been used.
COMPLIANCE STATEMENT
The compliance statement has to be placed in the manuals of the host device.
This device contains FCC Id : OW3BT101
MARKING OF THE FINAL DEVICE
The following label has to be placed on the final device :
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES:
OPERATION IS SUBJECT TO THE CONDITION THAT THIS
DEVICE DOES NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
FCC ID : OW3BT101
Model : BT101
CANADA : 661391179A
Serial No : On module lid
This device contains FCC Id: OW3BT101