User Manual

LRB-1 Nokia Bluetooth Tranceiver Component
- Preliminary Information -


April 2001 Confidential 2/11
LRB-1 Nokia Bluetooth Transceiver
Component
Product Features
q Complete stand-alone Class 2 Bluetooth transceiver system
q
Including baseband controller, 2.45 GHz radio part and firmware up to HCI
q Bluetooth V 1.0 B compliant and pre-certified
q Suitable for both voice and data applications
q
Point-to-Multipoint connection support
q Park, Hold and Sniff modes
q High speed UART and flexible PCM data interfaces
q
Several programmable control interfaces plus ADC input
q Internal oscillators and power regulators
q Adjustable I/O voltages
q
completely shielded and FCC approved
q Optimized size and form-factor: 23 x 19 x 2 mm
3
WARNING : LRB-1 IS A BLUETOOTH TRANSCEIVER COMPONENT, WHICH HAVE BEEN TESTED WITH A
RECOMMENDED ANTENNA DESIGN AND SHOULD ONLY BE USED BY NOKIA IN APPROPRIATE PRODUCTS.
THESE PRODUCTS WILL HAVE TO BE TESTED AGAIN FOR COMPLIANCE. USERS ANS INSTALLERS MUST USE
ONLY THOSE ANTENNAS SPECIFIED BY NOKIA, TO COMPLY WITH FCC'S R.F. EXPOSURE REQUIREMENTS TO
AVOID EPOSING PERSONS TO HARMFUL R.F. RADIATION. DO NOT SUBSTITUTE ANY SUPPLIED ANTENNA
RECOMMENDED BY THE SUPPLIER. CONTACT YOUR SUPPLIER FOR FURTHER INSTRUCTIONS.