Nokia Bluetooth Headset BH-112 User Guide Issue 1
Introduction About your headset With the Nokia Bluetooth BH-112 headset, you can handle calls hands-free, even when you are using two mobile devices at the same time. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
Get started Keys and parts 7 1 6 2 5 3 4 1 2 3 4 5 6 7 Charger connector Indicator light Power key Microphone Call key Earpiece Earloop Start using your headset When you switch on your headset for the first time, a voice prompt helps you set up your headset. Voice prompts are not available in all languages. The headset comes with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear.
1 2 3 Connect the charger to a wall outlet. Connect the charger cable to the charger connector on the headset. The red indicator light turns green when the battery is fully charged. Disconnect the charger from the headset, then from the wall outlet. When you unplug a charger, hold and pull the plug, not the cord. The fully charged battery has power for up to up to 5 hours of talk time or up to up to 150 hours of standby time.
4 5 6 Pairing mode is activated, and a green indicator light starts to flash quickly. Follow the voice prompt. Within 3 minutes, activate Bluetooth on the phone, and set it to search for Bluetooth devices. For details, see the user guide of the phone. Select the headset from the list of found devices. If required, enter the passcode 0000. You can pair your headset with 8 compatible phones, but you can only connect it to a maximum of 2 phones at the same time.
Make a call Make a call in the normal way. Answer a call Press . End a call Press . Reject a call Press twice. Switch a call between your headset and phone for 2 seconds. Press and hold You can redial the last called number or use voice dialling, if your phone supports these features with the headset. Redial the last called number When no call is in progress, press twice. Use voice dialling When no call is in progress, press and hold in the user guide of your phone.
End an ongoing call, and answer a call on another phone Press . Put an ongoing call on hold, and answer a call on another phone for 2 seconds. Press and hold Switch between active and held calls Press and hold for 2 seconds. End an ongoing call, and activate a held call Press . If you redial or use voice dialling, the call is made on the phone you last had an active call on with the headset. Settings Clear device pairings 1 To switch the headset off, press and hold for 2 seconds.
Use the charger for its intended purpose only. Improper use or use of unapproved chargers may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe the charger is damaged, take it to a service centre for inspection before continuing to use it. Never use a damaged charger. Only use the charger indoors. Take care of your device Handle your device, charger and accessories with care. The following suggestions help you protect your warranty coverage.
FCC/INDUSTRY CANADA NOTICE This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.