Nokia Bluetooth Stereo Headset BH-111 9227195/1 Cyan Magenta Yellow Black
Cyan Magenta Yellow Black
Introduction About your headset With the Nokia Bluetooth Stereo Headset BH-111, you can handle calls hands-free and enjoy your favourite music on the go. The headset is easy to pair with compatible devices, and you can switch smoothly between music and calls. The surface of this product is nickelfree. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
Headset Profile (HSP) 1.0, Hands-Free Profile (HFP) 1.5, Advanced Audio Distribution Profile (A2DP) 1.2, and Audio Video Remote Control Profile Get started Keys and parts 1 Charger connector 2 Volume knob and indicator light 3 Microphone 4 Rewind key 5 Multifunction key 6 Fast-forward key 7 Play/Pause key 8 Audio connector (3.5 mm) 9 Clip Charge the battery Before using the headset, you must charge the battery. ENGLISH (AVRCP) 1.0.
When the battery charge is low, the headset beeps every 5 minutes and the red indicator light flashes. When the battery is charging, the red indicator light is on. Check the battery charge — With your headset connected to .A your mobile device, press green light indicates a sufficient charge level. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery. Switch the headset on Press and hold for 2 seconds.
mode is activated automatically. If you have previously paired your headset with a device, press and hold for 5 seconds. The green indicator light starts to flash quickly. 4. Within about 3 minutes, set your device to search for Bluetooth devices. For details, see the user guide of the device. 5. On your device, select the headset from the list of found devices. 6. If required, enter the passcode 0000. In some devices, you may need to make the connection separately after pairing.
used device, press and hold for 2 seconds. To manually connect the headset to a device that supports the A2DP profile, press . Wear the headset ENGLISH Make sure you insert the earpiece marked with L into your left ear and the one marked with R into your right ear. You can attach the headset to your clothing using the clip. Connect the headphones to the audio connector. The headset is provided with different-sized rubber earpieces. Select the ones that fit you best.
supports these features with the headset. Redial the last called number — When no call is in twice. progress, press Activate voice dialling — When no call is in progress, press and for 2 seconds, and follow hold the instructions in the user guide of your mobile device. ENGLISH Switch calls between your headset and your mobile device — To switch a call from the headset to a compatible mobile device, or back to the for 2 headset, press and hold seconds.
If you receive or make a call while listening to music, the music is paused. . Play the next song — Press Play the previous song — Press twice. Start the current song from the . beginning — Press Scroll through the current song or quickly — Press and hold . Settings Switch the indicator lights off You can switch the indicator lights off if you do not want them to be shown, for example, during a call. When the headset is connected to and a device, press and hold for 5 seconds.
Clear the pairings Switch the headset off, and press for 9 seconds. The and hold headset beeps twice, and the red and green indicator lights alternate. After the settings are cleared, pairing mode is activated. Troubleshooting Cannot connect the headset to a compatible device? Make sure ENGLISH that the headset is charged, switched on, and paired with the device.
Talk and standby times are estimates only. Actual times are affected by, for example, device settings, features being used, battery condition, and temperature. If the battery has not been used for a long time, to begin charging, you may need to connect the charger, then disconnect and reconnect it. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. When your charger is not in use, unplug it from the electrical plug and the device.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, allow the device to dry. • Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged. • Do not store the device in high temperatures. High temperatures can shorten the life of the device, damage the battery, and warp or melt plastics. • Do not store the device in cold temperatures.
Copyright and other notices DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-111 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.nokia.com/ phones/declaration_of_conformity/. © 2011 Nokia. All rights reserved. Nokia, Nokia Connecting People, and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation.
document or withdraw it at any time without prior notice. To the maximum extent permitted by applicable law, under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The availability of products may vary by region. For more information, contact your Nokia dealer.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: FCC Radiation Exposure Statement: This equipment complies ENGLISH with FCC radiation exposure limits set forth for an uncontrolled environment.
