Nokia Bluetooth Headset BH-109 Issue 1
Introduction About your headset With Nokia Bluetooth Headset BH-109, you can handle calls hands-free, even when you are using two mobile devices at the same time. For support, go to www.nokia.com/support. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. Parts of the product are magnetic. Metallic materials may be attracted to the product.
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following profiles: Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.
Charge the battery Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard. When you unplug a charger, hold and pull the plug, not the cord. 1 2 3 Connect the charger to a wall outlet. Connect the charger cable to the charger connector in the headset.
2 3 4 5 If you have never paired the headset with a device, or you have emptied the paired devices list, switch the headset on. If you have previously paired your headset with another device, press and hold the power key for 5 seconds. The green indicator light starts to flash quickly. Within 3 minutes, activate Bluetooth on the device, and set it to search for Bluetooth devices. For details, see the user guide of the device. Select the headset from the list of found devices.
Make calls Make and receive calls Make a call When the headset is connected to your compatible mobile device, make a call normally using your mobile device. Answer or end a call Press the call key. Reject a call Press the call key twice. Switch a call between your headset and mobile device During a call, press the call key for 2 seconds. You can redial the number you last called or make a call by using your voice, if your mobile device supports these features with the headset.
End the call and answer the other one Press the call key. Connect the headset to two devices You can connect your headset to two devices, for example, when you want to make calls using both your personal and your work mobile device. Switch off the headset, and press and hold the power key for 5 seconds. The green indicator light starts to flash quickly. Press and hold the power key and volume up key for 5 seconds. The green indicator light flashes once.
When the headset is connected to a device, press and hold the call key and the volume down key for 5 seconds. The yellow indicator light flashes once. Some indication lights may still be shown, for example, when the battery charge is low. Switch the lights back on Press and hold the call key and the volume up key for 5 seconds. The green indicator light flashes once. Clear the pairing You can manually empty the paired devices list from your headset.
Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Recycle when possible. Do not dispose as household waste. Never use any charger that is damaged. Operating times are estimates only. Actual performance depends on many factors such as device settings selected, device features being used (or running in the background), battery condition and ambient temperature.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.
