User guide

Trimble M3 Total Station User Guide 41
Before Going to the Field 3
4. Press [ESC] to return to the HOT MENU screen.
Selecting a point name and point code
1. Press
[5] in the HOT MENU screen to open the
Point number/Point code screen.
2. Do one of the following:
– To change the input mode, press
[F1] <ABC>.
– To select the input from the list, press
[F2] List.
– To select the input from a previously used
point name or code, press
[F3] Stack.
3. Then do one of the following:
– To return to the screen in which you
pressed , press
[F4].
– To return to the
HOT MENU screen, press
[ESC].
Selecting a target configuration
1. Press
[6] in the HOT MENU screen to open the
Set Target screen.
2. Do one of the following:
– To move the cursor in the target list, press
[^]
or [v] or [1] – [5] and then press [MEAS/ENT] to
select the highlighted item.
–Press
[F2] Edit to edit the target settings,
see Editing target settings, page 42.
3. To select the highlighted target, press
[F4] o.k..
Table 3.3 Allowable values for error corrections
Setting Input range
Prism constant -999 – 999 (numeric input)
Temperature -40 °C – 70 °C
Pressure 440 hPa – 1460 hPa
Scale 0.995000 – 1.00500
C&R corr. 0.132, 0.142, 0.200, or OFF
Sea level corr. ON/OFF