User guide

2 Overview of the Trimble M3 Total Station
18 Trimble M3 Total Station User Guide
c. To return to the 3-switch window, press [<]
or [>].
4. Press
[ESC] to close the 3-switch window.
20.1 Status bar
The status bar appears on the right side of every screen. It contains indicators that
reflect the status of various system functions:
Signal level indicator
The signal level indicator shows the reflected light intensity:
Indicator Signal level
Level 4 (maximum)
Level 3
Level 2
Level 1 (minimum)
If this indicator is blinking, there is excessive signal for DR-mode
measurement.
If this indicator is blinking rapidly, there is no signal.
If this indicator is blinking slowly, the signal is low.
If there is no indicator, analog power for EDM is off.
Signal indicator
Input mode indicator
DR/PR mode indicator
Backlight on indicator
Battery level indicator
Compensator indicator