User guide

Trimble M3 Total Station User Guide 151
Glossary
This section explains the softkeys and some of the terms used in this manual.
.27 Softkey glossary
The following softkeys are used in the software.
?A
Search a point by address.
?C
Search a point by point code.
?P
Search a point by point number/name.
?↓ Search for another point with the same condition.
A=P
Replace point A with point P.
A=S
Define point A as the station point (S).
Add
Add an item ( for example a point name or number).
A-P
Proceed with the radial connecting distance function.
Az
Input the azimuth value.
B=S
Define point B as the station point (S).
BeaDist
Open the bearing distance screen.
c/i
Set the angle adjustment
CHCK
Adjust C and I.
C-no / C-Yes
Turn the compensator adjustment on and off.
Comp
Set the compensator adjustment.
CRAT
Create a job.
Del
Delete data lines.
Disp
Open a view data screen.
DISP
Change the display between Z, h, and w.
ECC
Open the eccentric measurement screen.
Edit
Enables you to edit data fields.
HA=0
Set or reset the horizontal angle to zero.
hSet
Input offset h.