User guide

Trimble M3 Total Station User Guide 133

Data Formats B

Record changed settings of the instrument

To permanently record change instrument settings, activate the

Record Settings

menu. The following changed settings and adjustments are recorded when the

instrument is ON.

For M5 | Adr 00009 | TI INPUT |th 2.000 m |ih 1.700 m |

For M5 | Adr 00016 | TI INPUT |T_ 25 C |P 1000 hPa |PC -0.005 m|

For M5 | Adr 00017 | TI INPUT |m 1.000005 | | |

For M5 | Adr 00022 | TI DR |th 0.000 m |PC 0.000 m |A 0.035 m|

For M5 | Adr 00023 | TI PR |th 2.000 m |PC -0.005 m |A 0.030 m|

For M5 | Adr 00026 | PI1 S 1000 |Y 1000.000 m |X 2000.000 m |Z 0.000 m|

For M5 | Adr 00027 |TI | |Om 200.0035 grd | |

Record T1 T2 T3 Comment

INPUT th ih - input th/ih

ADJUST V1(1) V1(2) i adjustment V-index/Collimator

ADJUST Hz(1) Hz(2) c adjustment V-index/Collimator

ADJUST - SK SZ adjustment V-index/Collimator or Compensator

INPUT T_ P PC Input Temp., Air Pressure, Prism constant

INPUT m - - Input scale

COM-ON - - - Compensator switched ON

COM-OFF - - - Compensator switched OFF

Hz = 0 - Hz(=0)

HOLD - Hz - HA set to desired angle

DR - PC A DR mode switched on. PC=set, A=calculated (PC is the set

value in Target set.)

PR - PC A PR mode switched on. PC=set, A=calculated (PC is the set

value in Target set.)

Hz + - - - HA increment direction is set to clockwise.

Hz - - - - HA increment direction is set to counter-clockwise.