User guide

Trimble M3 Total Station User Guide 131
Data Formats B
B8.2 Additional data lines of M5 data format – header/changed setting
The additional M5 data lines are implemented to optimize transferring data (import /
export) from and to the Trimble office software. Trimble office software includes the
Trimble Total Control software, Trimble Geomatics Office software, and the
TerraModel software.
The Header is recorded after you switch ON the instrument and begins with START
and ends with END.
The new identifiers in the M5 Format – Header are:
*1 1:XY, 2:YX, 3:NE
*2 Depending on the "Coord System" settings, 1:YX/XY/EN, 2:XY/YX/NE
Language codes
The two-digit language codes are:
For M5 | Adr 00001 | TI START |01 M3 5"DR |02 131500 |03 1.00 |
For M5 | Adr 00002 | TI |04 30 | | |
For M5 | Adr 00003 | TI |05 1 |06 1 | |
For M5 | Adr 00004 | TI |20 1 |21 11 |22 16 |
For M5 | Adr 00005 | TI |th 1.900 m |ih 1.600 m | |
For M5 | Adr 00006 | TI |i -0.0005 grd |c 0.0025 grd |SZ 0.0005 grd |
For M5 | Adr 00007 | TI | | |SK 0.0060 grd|
For M5 | Adr 00008 | TI |T_ 20 C |P 1012 hPa |PC 0.035 m |
For M5 | Adr 00009 | TI END |m 1.000000 | | |
Abbreviation Description Digits Characters
01 Type instrument 7 M3 3"DR or M3 5"DR
02 Number of instrument 6 numeric
03 Version software 4 numeric
04 Language
See *2 Depending on the "Coord
System" settings, 1:YX/XY/EN,
2:XY/YX/NE, page 131.
2numeric
05 Coord System 1 numeric
*1
06 Order Coord. Syst 1 numeric
*2
20 Position I 2 numeric
21 Position C 2 numeric
22 Position P 2 numeric
Code Language
23 German
30 English
31 Czech
32 Italian