User guide

Trimble M3 Total Station User Guide 125
Troubleshooting A
A.4 Stakeout
A.5 Uploading Point Name / Point Code list
Can't assign CTRL PT Job
You are creating a new job and are
trying to assign the current open job as
the control point job.
Press any key to return to the
previous screen and specify a
different job as the control point
job.
Note – If you need to use the
current job as the control job,
then you need to create/open a
different job as the current job.
Cannot delete opened job
You are about to delete an open
(active) job.
Press any key to return to previous
screen.
Cannot delete NONAME job
You are about to delete a NONAME job. Press any key to return to previous
screen.
Error message Cause Solution
S-O point = STN
The stakeout point and the station
point have the same coordinates:
Input a different coordinate for
the stakeout.
Error message Cause Solution
Up to 254 Labels
The point name/code lists can not
contain more than 254 items.
Press any key to return to the
previous screen and then delete
items from the list so that it has
less than 254 items.
Change Name Already Exist
The list contains an item that has the
same name as the one your are
assigning.
Press any key to return to the
previous screen and then change
the item name or delete one of
the items.
Check Data Line nnn
There was a grammatical error in the
list.
Press [ESC] to return to the
previous screen and check the
format in the indicated line.
Data full Change
Recording=OFF
When the internal memory is becoming
full during the recording process.
Press any key. The system
automatically turns off the data
recording mode and continues the
process.
Data area is full
When the internal memory is getting
full while uploading coordinate, point
number list or point code list.
Press any key to return to the
previous screen.
Recording: OFF
Occurs when you hold down the
Trimble key for one second or select
[5] P/C in the HOT menu while the
Recording setting is OFF.
Press any key to return to the HOT
menu screen.
Error message Cause Solution