User guide

Trimble M3 Total Station User Guide 105

Applications 8

To accept the constants that appear, press [F4] o.k..

8.2 Vertical plane

A vertical plane is defined by angle and distance measurements to two points. The

coordinates of further points in this plane are determined by an angle measurement

only.

Note – xSet is the x-coordinate value in this plane direction. You can define the

x-coordinate for any measuring points (P). For h-axis direction, hSet performs the same

function.

This option enables you to determine coordinates in a vertical plane to compute

heights and volume. It also allows you to set out sectional planes for facade

construction.

To start the vertical plane option, from the

Application menu, select [4] V-Plane.

Note – In any measurement screen, you can press to

change the point number and point code and the EDM

mode, or check recorded data.

x Set

hSet