User Manual

Getting started
10
connection for a short while. If the connection cannot be re-established,
the call is transferred to the phone and continued normally, and the
wireless audio adapter returns to Idle.
■ Optimising the adapter use
The following will help you to use your adapter in an optimal way:
• You should set the phone´s back light settings in Automatic mode to
prevent unnecessary battery consumption. In most Nokia phones,
select Automatic at the phone menu under Settings =>Accessory
settings=> Handsfree =>Lights. Then select Automatic.
• The phone´s internal vibrator works only when the adapter is in
Power saving mode.
• You should not use the Silent profile in your phone, because then you
are not able to hear the ringing tone and you might not notice the
call. The Automatic answer does not work when the Silent profile is
active.
• If you have switched your phone off and you have the adapter
attached to it , the adapter switches to Init mode when you connect
the charger to the phone.
AD-5B_1en.fm Page 10 Monday, November 17, 2003 10:03 AM