User guide
Table Of Contents
- 3M™ Digital Library Assistant Software License
- Overview
- Getting Started
- Staff-level setup options
- Setting general options
- Adjusting the sound volume
- Changing the item width setting
- Selecting a language
- Changing the Reader Timeout setting
- Changing the Items Order Right-to-left setting
- Enabling Check Shelf alerts
- Enabling Backgound inventory
- Changing the Verify setting
- Changing the Time and Date settings
- Setting screen contrast
- Setting screen alignment
- Setting the find function default prefix
- Using the Setup Lists screen
- Administrator level setup options
- Accessing the Admin menu
- Using the administrator setup options
- Tag Data Format option (Model 803/804)
- TDFM Status option (Model 803/804)
- End Admin Mode option
- Shelf reading basics
- Straightening the shelf
- Aligning the antenna
- Adjusting the antenna
- Separating the tags from metal
- Practice exercise
- Managing the DLA work flow
- Customizing the DLA item display information
- Performing tasks
- Preparing the DLA for user
- Battery management
- Common DLA tasks
- Selecting DLA functions
- Using the Change Battery function
- Using display lists
- Saving Item IDs to the memory card
- Using the DLA trigger lock
- Using the Background Inventory function
- Using the screen light option (Handheld Model 702 and Model 802 only)
- Using the Verify option
- Quick access to Volume, Change Battery, About DLA (Model 803/804 only)
- Task quick reference guides
- Using the Check Shelf Order function
- Using the Collect Data function
- Using the Pull Items function
- Using the DLA to locate and pull items
- Using the Sort-and-shelve function
- Using the Find Items function
- Using the Search for Items function
- Using the Shelve Items function
- Using the Change Security function
- Using the Show Item Info function
- Only for libraries using location tags
- Using the Check Location function
- Using the Check Location+Order function
- Using the Inventory Location function
- Troubleshooting
- DLA staff training
- Warranty
- 3M Service
3M™ Digital Library Assistant User Guide
Method 2 – Move the items past the DLA
This method may only be necessary if you are reading very
thin items.
1. Hold the DLA stationary (near the shelf).
2. Move each of the thinner items past the DLA antenna.
3. Continue down the shelf (moving the DLA as necessary).
If the pacing sound stops, the DLA is no longer detecting a
tag and the antenna may be too far away.
78-8126-8418-7e © 3M 2012. All rights reserved. 39
DLA_056