User guide
Table Of Contents
- 3M™ Digital Library Assistant Software License
- Overview
- Getting Started
- Staff-level setup options
- Setting general options
- Adjusting the sound volume
- Changing the item width setting
- Selecting a language
- Changing the Reader Timeout setting
- Changing the Items Order Right-to-left setting
- Enabling Check Shelf alerts
- Enabling Backgound inventory
- Changing the Verify setting
- Changing the Time and Date settings
- Setting screen contrast
- Setting screen alignment
- Setting the find function default prefix
- Using the Setup Lists screen
- Administrator level setup options
- Accessing the Admin menu
- Using the administrator setup options
- Tag Data Format option (Model 803/804)
- TDFM Status option (Model 803/804)
- End Admin Mode option
- Shelf reading basics
- Straightening the shelf
- Aligning the antenna
- Adjusting the antenna
- Separating the tags from metal
- Practice exercise
- Managing the DLA work flow
- Customizing the DLA item display information
- Performing tasks
- Preparing the DLA for user
- Battery management
- Common DLA tasks
- Selecting DLA functions
- Using the Change Battery function
- Using display lists
- Saving Item IDs to the memory card
- Using the DLA trigger lock
- Using the Background Inventory function
- Using the screen light option (Handheld Model 702 and Model 802 only)
- Using the Verify option
- Quick access to Volume, Change Battery, About DLA (Model 803/804 only)
- Task quick reference guides
- Using the Check Shelf Order function
- Using the Collect Data function
- Using the Pull Items function
- Using the DLA to locate and pull items
- Using the Sort-and-shelve function
- Using the Find Items function
- Using the Search for Items function
- Using the Shelve Items function
- Using the Change Security function
- Using the Show Item Info function
- Only for libraries using location tags
- Using the Check Location function
- Using the Check Location+Order function
- Using the Inventory Location function
- Troubleshooting
- DLA staff training
- Warranty
- 3M Service
3M™ Digital Library Assistant User Guide
Changing the Tag Protocol setting
Set the Tag Protocol setting to the type(s) of 3M™ RFID Tags that are used at your
site. The default setting is ISO.
1. Enter Admin mode.
2. From the Admin menu, select Settings.
The Admin Settings screen appears.
3. Under Tag Protocol, select the type of RFID tags used at your site (D1 and/or
ISO).
• If D1 is the only protocol selected, the Verify option will not appear in the
Options screen.
• If your site uses both D1 and ISO tags, select both checkboxes.
Tag Data Format option (Model 803/804)
Use this Admin function to select tag security methods and other parameters, select tag
formats, and arrange tag format priority.
1. Enter Admin mode.
2. Use the stylus to touch the menu bar area (the upper portion of the DLA screen) to
display the Admin menu.
3. From the Admin menu, select Tag Data Format. A screen with two tabs appears.
• Use the Settings tab to select tag security protocols and other parameters (if used).
• Use the Tag Formats tab to enable/disable specific tag formats, and to set tag
format priority.
Note: For optimal performance, only the formats used in your library should be enabled (disable all
unused formats in the list). Also, use the up/down buttons to give the most frequently used formats the
highest priority, with blank and ignore formats at the bottom of the priority list.
78-8126-8418-7e © 3M 2012. All rights reserved. 34
DLA_035c
OK Cancel
Admin Settings
Order Limits
Tag Protocol
D1
ISO
Admin Timeout:
Bkgr Inventory:
Color Scheme:
Thin Items:
Medium Items:
Thick Items:
10
User Choice
Standard
9
5
2
Auto Test
Barcode Filter Test
Memory Card Test
Home Screen Setup
Location Settings
Firmware Update
Copy Log...
Settings...
Tag Data Format...
TDFM Status
End Admin Mode
Admin Options