User guide
Table Of Contents
- 3M™ Digital Library Assistant Software License
- Overview
- Getting Started
- Staff-level setup options
- Setting general options
- Adjusting the sound volume
- Changing the item width setting
- Selecting a language
- Changing the Reader Timeout setting
- Changing the Items Order Right-to-left setting
- Enabling Check Shelf alerts
- Enabling Backgound inventory
- Changing the Verify setting
- Changing the Time and Date settings
- Setting screen contrast
- Setting screen alignment
- Setting the find function default prefix
- Using the Setup Lists screen
- Administrator level setup options
- Accessing the Admin menu
- Using the administrator setup options
- Tag Data Format option (Model 803/804)
- TDFM Status option (Model 803/804)
- End Admin Mode option
- Shelf reading basics
- Straightening the shelf
- Aligning the antenna
- Adjusting the antenna
- Separating the tags from metal
- Practice exercise
- Managing the DLA work flow
- Customizing the DLA item display information
- Performing tasks
- Preparing the DLA for user
- Battery management
- Common DLA tasks
- Selecting DLA functions
- Using the Change Battery function
- Using display lists
- Saving Item IDs to the memory card
- Using the DLA trigger lock
- Using the Background Inventory function
- Using the screen light option (Handheld Model 702 and Model 802 only)
- Using the Verify option
- Quick access to Volume, Change Battery, About DLA (Model 803/804 only)
- Task quick reference guides
- Using the Check Shelf Order function
- Using the Collect Data function
- Using the Pull Items function
- Using the DLA to locate and pull items
- Using the Sort-and-shelve function
- Using the Find Items function
- Using the Search for Items function
- Using the Shelve Items function
- Using the Change Security function
- Using the Show Item Info function
- Only for libraries using location tags
- Using the Check Location function
- Using the Check Location+Order function
- Using the Inventory Location function
- Troubleshooting
- DLA staff training
- Warranty
- 3M Service
3M™ Digital Library Assistant User Guide
Handheld Model 702 and Model 802
1. Enter administrator mode.
2. From the Admin menu, tap Contrast Test.
3. Tap the contrast icon ( ) located in the lower portion of the screen.
4. Use the slider to change the screen contrast.
Setting screen alignment
Handheld Model 803/804
If, while using the stylus on the DLA screen, the
various screen targets (drop-down list icons, etc.)
appear out of alignment, you can use the Align
Screen feature to recalibrate the screen.
1. From the DLA Home screen, select Setup
Options.
2. Press the Next button until the Options: Screen
appears.
3. Tap the Align Screen button.
4. Follow the on-screen alignment instructions.
Handheld Model 702 and Model 802
1. Remove the battery for approximately five minutes.
2. Insert a memory card with DLA software on it into the DLA.
3. Insert the battery into the handheld.
4. Press the Reset button (located on the bottom of the handheld near the antenna).
5. Follow the instructions to calibrate the screen using the handheld stylus.
6. At the Country/Date/Time screen, tap Next.
7. At the Setup Complete screen, tap Done.
8. Press and release the trigger.
9. At the Preferences screen, press and release the trigger to display the Set Clock screen.
10. Set the time and date.
11. Press OK.
The DLA Home screen appears.
78-8126-8418-7e © 3M 2012. All rights reserved. 25
D LA_ 0 8 4
Prev
Next
Home
Adjust Contrast
Press and hold stylus on center of target.
Repeat as target moves around screen.
Align Screen
Options: Screen
2
4
6
8
1 0
1 2
1 4
1 6
0 1 0 0