User guide
Table Of Contents
- 3M™ Digital Library Assistant Software License
- Overview
- Getting Started
- Staff-level setup options
- Setting general options
- Adjusting the sound volume
- Changing the item width setting
- Selecting a language
- Changing the Reader Timeout setting
- Changing the Items Order Right-to-left setting
- Enabling Check Shelf alerts
- Enabling Backgound inventory
- Changing the Verify setting
- Changing the Time and Date settings
- Setting screen contrast
- Setting screen alignment
- Setting the find function default prefix
- Using the Setup Lists screen
- Administrator level setup options
- Accessing the Admin menu
- Using the administrator setup options
- Tag Data Format option (Model 803/804)
- TDFM Status option (Model 803/804)
- End Admin Mode option
- Shelf reading basics
- Straightening the shelf
- Aligning the antenna
- Adjusting the antenna
- Separating the tags from metal
- Practice exercise
- Managing the DLA work flow
- Customizing the DLA item display information
- Performing tasks
- Preparing the DLA for user
- Battery management
- Common DLA tasks
- Selecting DLA functions
- Using the Change Battery function
- Using display lists
- Saving Item IDs to the memory card
- Using the DLA trigger lock
- Using the Background Inventory function
- Using the screen light option (Handheld Model 702 and Model 802 only)
- Using the Verify option
- Quick access to Volume, Change Battery, About DLA (Model 803/804 only)
- Task quick reference guides
- Using the Check Shelf Order function
- Using the Collect Data function
- Using the Pull Items function
- Using the DLA to locate and pull items
- Using the Sort-and-shelve function
- Using the Find Items function
- Using the Search for Items function
- Using the Shelve Items function
- Using the Change Security function
- Using the Show Item Info function
- Only for libraries using location tags
- Using the Check Location function
- Using the Check Location+Order function
- Using the Inventory Location function
- Troubleshooting
- DLA staff training
- Warranty
- 3M Service
3M™ Digital Library Assistant User Guide
Staff-level setup options
Accessing staff setup options
The Setup Options and Setup Lists screens listed below provide staff-configurable options that allow you to
customize DLA operation. No password is required to access or modify these options.
Staff-level setup options page
Adjusting the sound volume 20
Changing the item width setting 20
Selecting a language 21
Changing the Reader Timeout setting 21
Changing the Items Order Right-to-left setting 21
Enabling Check Shelf alerts 22
Enabling Backgound inventory 22
Changing the Verify setting 23
Changing the Time and Date settings 24
Setting the find function default prefix 26
Using the Setup Lists screen 27
To display the Options screen
1. Use the scroll buttons to move down the list on the Home
screen until you see the Setup Options selection.
2. Press the Options button.
The Options: General screen appears.
To change a setting
1. Use the DLA stylus to tap the drop-down menu icon ( ) to
display a menu.
2. From the menu, use the stylus to select the new setting.
The menu closes and the new setting appears.
78-8126-8418-7e © 3M 2012. All rights reserved. 19
Home
Prev Next
Options: General
Items ordered right-to-left
“Check Shelf” alerts
Background inventory
Verify:
Sound volume:
Item Width:
Language:
Reader Timeout:
Setup Lists
Setup Options
User Mode Status
About DLA
About
Lists
Options Mode
DLA_031
Off
Low
Medium Low
Medium High
High
Medium
Thin
Thick
Medium
5
15
20
25
30
10
English
Français
Italiano
Home
Next
Prev
Options: Find
Prefix
Item ID:
Primary Info:
Secondary Info:
Set Clock
6/14/05 4:29 pm
Digital Library Assistant
DLA
Stylus
Medium
Medium
English
10