Users Manual

21
Microsoft
HoloLens2
Gray GMS-152
Brow pad
The brow pad is magnetically attached to
the device. To detach it, pull gently away.
To replace it, snap it back into place.
Care and cleaning
Remove any dust by gently wiping with
a dry lint-free microÀber cloth. Lightly
moisten the cloth with a mix of isopropyl
alcohol and water, and then gently wipe
the surface of the device.
To clean the brow pad, wipe it with a
cloth moistened with water and a mild
soap. Let it dry completely.
ENGLISHENGLISH
Hololens QSG Template.indd 21 13.06.19 00:27