Quick Start Guide X195899102QSG.
Getting Started To get started, you’ll need to wake your Microsoft Band by connecting it to a standard USB port. X195899102QSG.indd 2 To wake your band and begin charging: 1 Connect the magnetic end of the USB charging cable to the charging port on your band. Clean the charging contacts with a dry cloth before each future charge to prevent corrosion and skin irritation. 2 Connect the USB end of the cable to a standard USB port or USB power adapter.
1 2 X195899102QSG.
Get the Microsoft Health App You will need to pair your band with your smartphone. The Microsoft Health app is available for Windows Phone, Android™ and iPhone®. For a full list of supported devices, visit www.microsoft.com/band/ compatibility X195899102QSG.indd 4 1. On your smartphone browser, visit: microsoft.com/band/ setup 2. Follow the instructions to install the Microsoft Health app on your smartphone. 3.
X195899102QSG.
Wearing Your Microsoft Band You can wear your band on the inside or outside of either wrist; it’s your choice. The biometric sensors are designed to measure your heart rate in either orientation. X195899102QSG.indd 6 To fit your band: 1 Place your band around your wrist. Align the top of the clasp with the corresponding adjustment slot. 2 To adjust the fit of the band, depress both clasp tabs while adjusting the clasp position. Release the tabs to secure the clasp.
1 X195899102QSG.
Microsoft Band Controls To turn your band on: To turn your band off: 1. Press and hold the Power Button. 1. Press and hold the Power Button. 2. If your band was previously off, a vibration alert indicates your band is starting up. 2. Tap the Yes button to the right. Your band will vibrate to indicate shutdown. 3. After the display illuminates, use the touch screen to interact with your band. To turn your band’s display on or off: Using the touchscreen: 1. Press the Power Button. 1.
Touchscreen Power Button Action Button X195899102QSG.
Quick Tips To view your biometric activity: To track your sleep: 1. From the Start Strip, tap the ME Tile. 1. From the start strip, tap the Sleep Tile. 2. Swipe right to view biometric data screens. 2. Press the Action Button to start your sleep session. 3. Press the Action Button to change how the ME Tile looks. 3. Press the Action Button again to pause/resume/stop. To track your exercise: 4. To end your sleep, press the Action Button, then End. 1.
Start Strip Status Bar X195899102QSG.
Need Further Assistance? For the complete Microsoft Band product guide, visit: www.microsoft.com/band/productguide For answers to common questions, troubleshooting steps, and Microsoft Band Customer Support contact information, visit: www.microsoft.com/band/support Refer to the product guide for important safety and health information. © 2014 Microsoft. Microsoft, the Microsoft logo and Windows are trademarks of the Microsoft group of companies. iPhone is a registered trademark of Apple Inc.
