User manual

To answer the video call, press the call key. Allow
video image to be sent to caller? is displayed. To
start sending live video image, select Yes.
If you do not activate the video call, video sending is
not activated, and you only hear the sound of the caller.
A grey screen replaces the video image. To replace the
grey screen with a still image captured by the camera
in your device, select Tools > Settings > Phone >
Call > Image in video call.
To end the video call, press the end key.
Internet calls
With the internet call service (network service), you can
make and receive calls over the internet. Internet calls
can be established between computers, between
mobile phones, and between a VoIP device and a
traditional telephone. To make or receive an internet
call, your device must be connected to an internet call
service.
To connect to an internet call service, your device must
be in the coverage of a connection network, such as a
WLAN access point.
Your device supports voice calls over the internet (net
calls). Your device attempts emergency calls primarily
over cellular networks. If an emergency call using
cellular networks is not successful, your device
attempts an emergency call through your net call
provider. Due to the established nature of cellular
telephony, you should use cellular networks for
emergency calls, if possible. If you have cellular
network coverage available, make sure that your
cellular phone is switched on and ready to make calls
before you attempt an emergency call. The capability
for an emergency call using internet telephony
depends on the availability of a WLAN network and
your net call provider's implementation of emergency
call capabilities. Contact your net call provider to check
the internet telephony emergency call capability.
Create an internet call profile
Before you can make internet calls, you must create an
internet call profile.
1. Press
, select Tools > Settings >
Connection > SIP settings > Options > New
SIP profile, and enter the required information.
Ensure that Registration is set to Always on.
Contact your internet call provider for the correct
settings.
2. Select Proxy server > Transport type > Auto.
3. Select Back until you return to the main view of
connection settings.
4. Select Internet tel. > Options > New profile.
Enter a name for the profile, and select the SIP
profile you just created.
83
Make calls