User manual

If you selected Other as the mail service provider, define
the following settings for outgoing mail:
Outgoing server — Enter the host name or IP address
of the server that sends your mail.
Secure authentication — Set the system to use secure
authentication.
Secure connection — Define the security setting for
outgoing messages.
Use connection-specific SMTP servers — Use
connection-specific SMTP servers for sending mail. To
edit connection-specific SMTP server settings, select Edit
SMTP servers.
Tip: The settings for outgoing mail (SMTP) usually either
use a user name and a password, or are specific to a
connection. Without an SMTP user name and password,
your internet service provider may prevent you from
sending mail for security reasons.
7 To complete the e-mail account setup, select Finish.
Set up a Mail for Exchange account
To use Mail for Exchange, you need a Mail for Exchange
account.
To set up an account:
1 Select
> E-mail, open the menu, and select New
account.
2 Define the following:
Region — Select your country or region.
To search for a region, start entering the region name
using the keyboard.
Service provider — Select Mail for Exchange.
3 Enter your mail address, user name, password, and
domain.
4 Define the following:
Server — Enter the server address.
Port — Enter the port number for the Mail for Exchange
server connection. The field is pre-filled with the
standard HTTPS Mail for Exchange port number.
Secure connection — Use a secure connection.
5On the Synchronization content page of the wizard,
define the following:
E-mail — Enable mail synchronization.
Calendar and tasks — Enable calendar and task
synchronization.
Contacts — Enable contact synchronization.
First synchronization — If you have enabled contact
synchronization, you need to select if you want to
remove all local contacts when the device synchronizes
for the first time. Keep items on device is selected by
default.
66 Mail
© 2010 Nokia. All rights reserved.