User manual

Table Of Contents

Advanced settings

Advanced GPRS settings are modified in the same way as

WLAN settings.

Active data connections

In the status area, the active data connections are indicated

with the following icons:

A GPRS connection is active.

A wireless LAN (WLAN) connection is active.

Note: The actual invoice for calls and services from your

service provider may vary, depending on network features,

rounding off for billing, taxes, and so forth.

Close connections

Select the status area and a connection, and close the

connection.

Disable wireless connections

Disable connections

Briefly press the power key, and select Offline mode.

Enable connections

Briefly press the power key, and select Normal mode.

Important: In the Offline mode you cannot make or receive

any calls, or use other features that wireless network or

Bluetooth connection. Calls may still be possible to the official

emergency number programmed into your device. To use the

features, you must first set the device back to normal mode.

If the device has been locked, enter the lock code.

Internet connection settings

You can select which connections are used automatically,

define how often connections are scanned for in the

background, and set the device to switch to a saved WLAN

connection when available.

Select

> Settings and Internet connections >

Connect automatically.

Select a connection

Select whether you want to use a wireless Wi-Fi connection,

a GPRS connection, or whichever connection is available.

To select a connection each time you connect to the network,

select Always ask.

Define the frequency of automatic connection attempts

Select Search interval. The default value is 10 minutes.

Switch to Wi-Fi when available

If you want your device to use a saved Wi-Fi connection

instead of a GPRS connection when such Wi-Fi is available,

select Switch to Wi-Fi when available.

38 Connect your device