User manual

Tools
106
Scroll to a server profile, and select Options and from
the following:
Start configuration—to connect to the server and receive
configuration settings for your device
New server profile—to create a server profile
Edit profile—to change the profile settings
View log—to view the configuration log of the profile
To delete a server profile, scroll to it, and press .
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name
and password.
Allow configuration—To allow receiving configuration
settings from the server, select Yes.
Auto-accept all reqs.—To have your device to ask for your
confirmation before accepting a configuration from the
server, select No.
Network authentic.—Select if network authentication is used.
Network user name and Network password—Enter your
network user name and password to identify your device to
the server. These options are shown only if network
authentication is used.
Software updates
Note: This functionality may not be available
in your device. Contact your service provider for
more information.
To view or update the current software version of your
device, or to check the date of a possible previous update,
press and select Tools > Dev. mgr..
To check whether software updates are available, select
Options > Check for updates.
Make sure that the battery of your device has enough
power or connect the charger before starting the update.
To start the update, select access point. The device starts
to download the device data.
N75.EN_ESv1_BIL_9252942.book Page 106 Monday, April 2, 2007 3:31 PM