User manual

Tools
88
Tools
Settings
To change settings, press , and select Tools > Settings.
and a settings group. Select a setting you want to change.
Some settings may be preset for the device by your
network operator or service provider, and you may not be
able to change them.
Phone
General
Phone language—Changing the language of the
display texts in your device also affects the format used
for date and time and the separators used, for example,
in calculations. Automatic selects the language according
to the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and
the change remains effective until you change these
settings again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—Set the predictive text input On or Off for
all editors in the device. The predictive text dictionary is
not available for all languages.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Orig. phone settings—You can reset some of the settings to
their original values. To do this, you need the lock code. See
"Phone and SIM," p. 92. After resetting, the device may take a
longer time to power on. Documents and files are unaffected.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See "Active standby mode," p. 87.
Left selection key—Assign a shortcut to the left selection
key ( ) in the standby mode.
Right selection key—Assign a shortcut to the right
selection key ( ) in the standby mode.
N75.EN_ESv1_BIL_9252942.book Page 88 Monday, April 2, 2007 3:31 PM