User manual

Make calls
66
Options during a call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Decline, Swap, Hold or Unhold, Activate handset, Activate
loudsp., or Activate handsfree (if a compatible headset
with Bluetooth connectivity is attached), End active call
or End all calls, New call, Conference, Transfer, and Open
active standby. Select from the following:
Replace—to end an active call and replace it by answering
the waiting call.
Send touch tones—to send touch tone strings, for example,
a password. Enter the touch tone string or search for it in
Contacts. To enter a wait character (w) or a pause character
(p), press repeatedly. Select OK to send the tone.
Tip! You can add touch tones to the Phone
number or Touch tones fields in a contact card.
Log
To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select Applications > Log >
Recent calls. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open
a register, scroll to the event, and press .
Call timers
To monitor the approximate duration of your incoming
and outgoing calls, press , and select Applications >
Log> Call timers.
To set the display of the call timers while a call is active,
select Tools > Log > Options > Settings > Show call
duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See "Phone and
SIM," p. 92.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select Tools >
Log > Packet data. For example, you may be charged
for your packet data connections by the amount of data
sent and received.