User manual

Camera
22
If you select a new scene, the color and lighting settings
are replaced by the selected scene. See "Scenes," p. 22.
You can change the setup settings after selecting a scene
if needed.
Scenes
A scene helps you to find the right color and lighting
settings for the current environment. Select a proper scene
for taking pictures or recording video clips from the scene
list. The settings of each scene have been set according
to a certain style or environment.
Scenes are only available in the main camera.
Use the scroll key to scroll through the active toolbar,
and select from the following options:
Video scenes
Automatic ( )(default) and Night ()
Image scenes
Auto () (default), User defined (), Close-up
mode(), Portrait (), Landscape (), Sports (),
Night (), and Night portrait ().
When you take pictures, the default scene is Auto. You can
select the User defined scene as the default scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select Options >
Change. In the user defined scene you can adjust different
lighting and color settings. To copy the settings of another
scene, select Based on scene mode and the desired scene.
Take pictures in a sequence
Scenes are only available in the main camera.
To set the camera to take six pictures or more in a sequence
(if enough memory available), in the active toolbar, select
Switch to sequence mode.
To take six pictures, press the capture key. To take more
than six pictures, press and hold the capture key. To stop
taking pictures, release the capture key. You can capture
up to 100 images, depending on the available memory.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press to open it.
You can also use the sequence mode with the self-timer.
When using the self-timer, the maximum amount of pictures
is six pictures.
To return to the sequence mode viewfinder, press the
capture key.