User manual

Camera
20
After taking a picture
After you take the picture, select the following from the
active toolbar (available only if Show captured image
is set to Yes in Still image camera settings):
• If you do not want to keep the image, select Delete.
• To send the image using multimedia, e-mail, Bluetooth
connectivity, or infrared, or upload it to your online
album, press the call key, or select Send. For more
information, see "Messaging," p. 47, "Bluetooth
connectivity," p. 73, and "Online sharing," p. 33.
This option is not available during an active call.
• To tag images to the Print Basket for later printing,
select Add to Print Basket.
• To print the picture, select Print. See "Image print,"
p. 31.
• To capture a new image, select New image.
To rename the image, select Options > Rename image.
To use the picture as wallpaper in the active standby,
select Options > Set as wallpaper.
To set the image as a call image for a contact, select
Set as contact call img..
Still image camera settings
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup, see
"Setup settings—Adjust color and lighting," p. 21. The
setup settings return to the default settings after you close
the camera, but the main settings remain the same until
you change them again. To change the main settings,
select Options > Settings and from the following:
Image quality—Print 3M - Large-Large (2048x1536
resolution), Print 2M - Medium (1600x1200 resolution),
Print/e-mail 0.8M - Small (1280x960 resolution), or
Multimedia message 0.3M (640x480 resolution). The
better the image quality, the more memory the image
consumes. If you want to print the image, select Print 3M
- Large, Print 2M - Medium, or Print/e-mail 0.8M -
Small. If you want to send it through e-mail, select Print/
e-mail 0.8M - Small. To send the image through MMS,
select Multimedia message 0.3M.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list
of available albums opens.
Show captured image—Select Yes if you want to see
the captured image after it is taken, or No if you want
to continue taking pictures immediately.