User manual

Table Of Contents

Unlock with one look

For an easy and personal user authentication, set up Windows Hello Beta, a biometric

authentication feature, and unlock your phone easily with one look.

To set up Windows Hello Beta, you need to set up a sign-in PIN code on your phone.

1. Swipe down from the top of the screen, and tap All settings > Accounts > Sign-in

options.

2. To set up a sign-in PIN code, under PIN, tap Add.

3. Select the time after which your phone requires sign-in.

4. Once you’ve set up your sign-in PIN code, set up Windows Hello Beta. Tap Set up, and

follow the instructions.

If you wear glasses, remove them during the first setup. After that, to improve the recognition

with your glasses on and in different lighting conditions, tap Improve recognition.

5. To unlock your phone, press the power key, then turn the phone towards your face, and

wait for your phone to authenticate you.

A red LED is on during the authentication.

Tip: To unlock your phone, you can also always swipe up on the lock screen and type in

your sign-in PIN code.

Change your SIM PIN code

If your SIM card came with a default SIM PIN code, you can change it to something more

secure.

Not all network service providers support this feature.

1. Swipe down from the top of the screen, and tap All settings > Network &

wireless > Cellular & SIM.

124