User manual

device to connect to the destination using this access point
automatically.
Select Options > Advanced settings and from the
following:
• Network type — Select the internet protocol type to
transfer data to and from your device. The other settings
depend on the selected network type.
• Phone IP address (for IPv4 only) — Enter the IP address
of your device.
• DNS addresses — Enter the IP addresses of the primary
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your internet
service provider.
• Proxy server address — Enter the address of the proxy
server.
• Proxy port number — Enter the port number of the proxy
server.
WLAN internet access points
Select Menu > Control panel > Settings and
Connection > Destinations > Access point, and follow
the instructions on the display. Or, open one of the access
point groups, select an access point marked with
, and
select Edit.
Use the instructions provided by your service provider to edit
the following:
• WLAN network name — Select Enter manually or
Search for networks. If you select an existing network,
WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
• Network status — Define whether the network name is
displayed.
• WLAN network mode — Select Ad-hoc to create an ad
hoc network, and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
ad hoc network, all devices must use the same WLAN
network name.
• WLAN security mode — Select the encryption used:
WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If
you select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the network
supports them.
• Use access point — Select After confirmation to set the
device to ask for confirmation before the connection using
this access point is created or Automatically to set the
device to connect to the destination using this access point
automatically.
To enter the settings for the selected security mode, select
WLAN security settings.
Advanced WLAN settings
Select Options > Advanced settings and from the
following:
• IPv4 settings — Enter the IP address of your device, the
subnet IP address, the default gateway, and the IP
addresses of the primary and secondary DNS servers.
Contact your internet service provider for these addresses.
• IPv6 settings — Define the type of DNS address.
Settings
© 2008 Nokia. All rights reserved.154