User manual
Table Of Contents
- Nokia E66 User Guide
- Contents
- Safety
- Find help
- E66 in brief
- Set up your device
- Get started
- New from Eseries
- Personalisation
- Media
- Internet
- Messaging
- Phone
- Travelling
- Nokia Office Tools
- Connectivity
- Security and data management
- Settings
- General settings
- Telephone settings
- Connection settings
- Access points
- Packet data (GPRS) settings
- WLAN settings
- Advanced WLAN settings
- WLAN security settings
- WEP security settings
- WEP key settings
- 802.1x security settings
- WPA security settings
- Wireless LAN plugins
- Session initiation protocol (SIP) settings
- Edit SIP profiles
- Edit SIP proxy servers
- Edit registration servers
- Net call settings
- Configuration settings
- Restrict packet data
- Application settings
- Shortcuts
- Glossary
- Troubleshooting
- Product and safety information
- Index
2. Insert the memory card in the slot with the contact area
first. Make sure that the contact area is facing the
connectors on the device.
3. Push the card in until it locks into place.
4. Close the back cover.
Eject the memory card
Important: Do not remove the memory card during an
operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
1. Press the power key briefly, and select Remove memory
card.
2. Press the release buttons and slide off the back cover.
3. Press the end of the memory card to release it from the
memory card slot.
4. Close the back cover.
Connect the headset
Warning: When you use the headset, your ability to
hear outside sounds may be affected. Do not use the headset
where it can endanger your safety.
Connect the compatible headset to the headset connector of
your device.
Attach the wrist strap
Thread the wrist strap as shown, and tighten it.
© 2010 Nokia. All rights reserved. 17