User manual

High-speed packet access (HSPA) is supported and
available (network service). The icon may vary
between regions.
indicates that the connection is
active.
indicates that the connection is on hold.
You have set the device to scan for wireless LANs
(WLAN), and a WLAN is available.
A WLAN connection is active in a network that does
not have encryption.
A WLAN connection is active in a network that has
encryption.
Your device is connected to a computer with a USB
data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If you
have two phone lines, a number indicates the active
line.
A headset is connected to the device.
A handsfree car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push to talk (PTT) connection.
Your push to talk connection is in do not disturb
mode, because the ringing type of your device is set
to Beep once or Silent, or you have an incoming or
ongoing phone call. In this mode, you cannot make
PTT calls.
Write text
The input methods provided in the device may vary according
to different sales markets.
Traditional text input
indicates traditional text input.
and indicate the uppercase and lowercase.
indicates the sentence case, that is, the first letter of
the sentence is written in uppercase and all the other letters
are automatically written in lowercase.
indicates
number mode.
To write text with the keyboard, press a key with the desired
character repeatedly until the character is displayed. There
are more characters available for a key than are printed on
the key. If the next letter is located on the same key as the
present one, wait until the cursor is displayed, and enter the
letter.
To insert a number, press and hold the key with the desired
number.
© 2010 Nokia. All rights reserved.26