User manual

Tip: Selecting UMTS enables faster data transfer, but
may increase the demand on battery power and reduce
the battery life. In regions close to both GSM and UMTS
networks, selecting Dual mode may cause constant
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select Operator selection and
Manual to select from available networks, or Automatic to
set the device to select the network automatically.
To set the device to indicate when it is used in a microcellular
network (MCN), select Cell info display > On.
Connection settings
Select Menu > Ctrl. panel > Settings and Connection.
Select from the following:
• Bluetooth — Edit the Bluetooth settings.
• USB — Edit the data cable settings.
• Destinations — Set up new or edit existing access points.
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
• VPN — Manage the settings for virtual private
networking.
• Packet data — Define when packet data network is
attached, and enter the default packet switched access
point name if you use your device as a modem for a
computer.
• Wireless LAN — Set the device to display an indicator
when a wireless LAN (WLAN) is available, and define how
often the device searches for networks.
• Video sharing — Enable video sharing, select the SIP
profile for video sharing, and define the video saving
settings.
• SIP settings — View or create session initiation protocol
(SIP) profiles.
• XDM profile — Create an XDM profile. The XDM profile is
required for many communications applications, for
example, presence.
• Presence — Edit the settings for presence (network
service). To register for the service, contact your service
provider.
• Remote drives — Connect the device to a remote drive.
• Configurations — View and delete trusted servers from
which your device may receive configuration settings.
• APN control — Restrict packet data connections.
Access points
Create a new access point
Select Menu > Ctrl. panel > Settings and Connection >
Destinations.
You may receive access point settings in a message from a
service provider. Some or all access points may be preset for
your device by your service provider, and you may not be able
to change, create, edit, or remove them.
When you select one of the access point groups (
, , ,
, ), you can see the access point types:
© 2010 Nokia. All rights reserved.140