User manual

Table Of Contents
Assign a phone number to a number key
1 Select the number key to which you want to assign the phone number.
1 is reserved for the voice mailbox.
2 Select the phone number from your contacts list.
Remove or change a phone number assigned to a number key
Select and hold the assigned key, and from the pop-up menu, select Remove or
Change.
Make a call
On the home screen, select Call to open the dialer, and select and hold the assigned
number key.
Use your voice to call a contact
With voice commands, you can use your voice to make calls or control your device.
Voice commands are not dependent on the speaker’s voice. Commands are
automatically created by your device.
When entering contacts or editing voice commands, do not use very short or similar
names for different contacts or commands.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance
away when you say the voice command.
1 On the home screen, press and hold the call key. If a compatible headset with the
headset key is attached, press and hold the headset key.
2 A short tone sounds, and Speak now is displayed. Say clearly the name that is saved
for the contact.
3 The device plays a synthesized voice command for the recognized contact in the
selected device language, and displays the name and number. To cancel the voice
dialing, select Quit.
Listen to a voice command for a contact
1 Select a contact and Options > Voice tag details.
2 Select a contact detail.
If several numbers are saved for a name, you can say also the name and the number
type, such as mobile or telephone.
Telephone 43