User manual

Call functions
23
3. Call functions
■ Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), enter the country code, the
area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
To increase the volume in a call, press the volume up key and to decrease
press the volume down key.
3. To end the call or to cancel the call attempt, press the end key.
To search for a name or phone number that you have saved in Address book,
see"Find a contact," p. 64. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
Speed dialing
Assign a phone number to one of the speed-dialing keys, 2 to 9. See "Speed dial
list," p. 66. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
•If Speed dialing is set to On, press and hold a speed-dialing key until the call
begins. See Speed dialing in "Call settings," p. 73.
Enhanced voice dialing
You can say the name saved in the contact list of the phone to make a phone call.
Voice commands are not language-dependent. To set the language, see Voice
playback lang. in "Phone settings," p. 74.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
1. In the standby mode, press and hold the right selection key or press and hold
the volume down key. A short tone is played, and Speak now is displayed.