User manual

Media
58
Save channels
1. To start the channel search, select and hold or . To change the radio
frequency in 0.05 MHz steps, press or .
2. To save the channel to a memory location 1 to 9, press and hold the
corresponding number key.
3. To save the channel in the memory location from 10 to 20, press 1 or 2, and
press and hold the number key (0 to 9) you want.
4. Enter the name of the channel, and select OK.
Listen
1. Select Menu > Media > Radio.
2. To scroll to the channel you want, select or , or press the headset key.
3. To select a radio channel location, briefly press the corresponding number keys.
4. Select Options and one of the following options:
Turn off — to turn off the radio
Save station — to save a new channel by entering the channel’s name
Stations — to select the list of saved channels. To delete or rename a channel,
scroll to the channel you want, and select Options > Delete station or Rename.
Mono output or Stereo output — to listen to the radio in monophonic sound
or in stereo
Loudspeaker or Headset — to listen to the radio using the loudspeaker or
headset. Keep the headset connected to the phone. The lead of the headset
functions as the radio antenna.
Set frequency — to enter the frequency of the radio channel you want
You can normally make a call or answer an incoming call while listening to the
radio. During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is sending or
receiving data, it may interfere with the radio.
■ Recorder
You can record pieces of speech, sound, or an active call. This is useful when recording
a name and phone number for writing them down later.
The recorder cannot be used when a data call, EGPRS, or GPRS connection is active.