User manual

[ 52 ]
• To send the business card via IR, make sure the receiving device
is set up to receive data via its IR port and select Via infrared.
• To send the business card as a message, select Via text message.
3 If you selected Via infrared (and the entry has multiple sub-entries)
scroll to Primary no. or All details and press Select. Your business
card is sent.
or
If you selected Via text message (and the entry has multiple sub-
entries), scroll to Primary no. or All details and press Select.
4 Enter the number for your recipient or press Find to retrieve a number
from your Phone book.
5 Press OK and the business card is sent.
• 1-TOUCH DIALING
You can associate any entry in your Phone book with keys 2 through
9 and then dial those entries by pressing and holding the assigned key.
Assign a key to 1-touch dialing
1 At the Start screen, press Names, scroll to 1-touch dialing and
press Select.
2 Scroll to any empty slot and press Assign.
3 Enter the number (including the area code) and press OK, or press
Find to retrieve a number from your Phone book.
4 Enter a name for the number and press OK.
• If 1-touch dialing is off, the phone displays a prompt asking if you’d
like to turn 1-touch dialing on. Press Yes to activate 1-touch dialing.
5 The entry appears in the slot you’ve assigned.
Make a call with 1-touch dialing
• Press and hold the key to which an entry has been assigned. Your
phone dials the entry assigned to the key.