OWNER’S MANUAL 282
Keys and Scrolls through menu functions and Phone Book. Adjusts earpiece volume during a call. When held, scrolls continuously. LED indicator Flashes fast for incoming calls. Flashes slowly when phone is in service. OK Confirms and selects choices on display. Finds a Phone Book entry by name. MENU Enters the menu. SEND Dials the phone number on the display. Answers a call. 0-9, !, and # Number and character keys. PWR A long press turns the phone on or off.
Contents 1. For Your Safety . . . . . . . . . . . . . . . . . 1 FCC/Industry Canada Notice . . . . . . . . . . . . . . . . . . . . . 2 Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Quick Start . . . . . . . . . . . . . . . . . . . . 3 Opening the phone cover. . . . . . . . . . . . . . . . . . . . . . . . 3 Making your first call . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calling card calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PIN calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Voice and text messages. . . . . . . . . . . . . . . . . . . . . . . What is Prepaid Mode? . . . . . . . . . . . . . . . . . . . . . . . . 6. The Phone Book . . . . . . . . . . . . . . . . 23 Saving entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10. Accessories . . . . . . . . . . . . . . . . . . . 68 11. Reference Information . . . . . . . . . . . 73 12. Troubleshooting . . . . . . . . . . . . . . . . 79 13. Technical Information . . . . . . . . . . . . 80 14. Warranty . . . . . . . . . . . . . . . . . . . . . 81 15. Index . . . . . . . . . . . . . . . . . . . . . . .
1. For Your Safety Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal. For more detailed safety information, see “Important Safety Information” on page 73. Road Safety Comes First Don’t use a hand-held phone while driving; park the vehicle first. Switch Off In Hospitals Follow any regulations or rules. Switch phone off near medical equipment. Switch Off On Aircraft Mobile phones can cause interference.
FCC/Industry Canada Notice Your phone may cause TV or radio interference (e.g. when using a telephone in close proximity to receiving equipment). The FCC/Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
2. Quick Start Opening the phone cover To prolong the life of your phone, hold it in one hand while opening the cover with the other hand. Making your first call 1 Install and charge the battery (see “Battery Information” on page 7). 2 Give PWR a long press to switch on your phone. Wait for the signal indication to appear. 3 Enter the area code (if needed) and the phone number, then press SEND. 4 To end the call, press END or close the cover.
Using the cover to answer and end calls • You can answer incoming calls by opening the cover if the Active Cover menu feature is set to On. (See “Active Cover (Menu 3 12)” on page 40). Note: To prolong the life of your phone, hold it in one hand while opening the cover with the other hand. • You can end a call by closing the cover. The Ready screen When you see the term “Ready screen” in this manual, it means the phone’s display is free of phone numbers, names, and menu items.
3. Display Indicators AB ABC Shows which type of system your phone will use when it is roaming (see also the table “System selection and display indicators” on page 44). Your phone is using the Home system (see also the table “System selection and display indicators” on page 44). You have an active call. You can enter letters or view names. You have one or more voice messages waiting. You have one or more text messages waiting. Blinks when Messages list is full.
Signal strength indication A cellular phone sends and receives radio signals. As with all radio equipment, the quality of radio reception depends on the strength of the radio signal in the area where you are operating your phone. The strength of the cellular signal is shown by the vertical bar on the lefthand side of the display. The higher the bar, the stronger the signal at your present location, and the more likely you are to get good call quality.
4. Battery Information Your phone is powered by a rechargeable LithiumIon battery. Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. See “Important Battery information” on page 10. Note: A new battery must be charged before use. Installing the Battery 1 2 3 1 Slide the battery cover down slightly, then lift it off. 2 Put the battery in the space on the back of the phone.
Charging the Battery 1 Connect the lead from the charger to the bottom of your phone, or place the phone in the Compact Desktop Charging Stand (optional accessory). Note: See the “Accessories” section starting on page 68 for more charging options. 2 Plug the charger into a standard wall outlet. When charging starts, the segments of the battery indicator scroll and the phone beeps once. After the segments of the battery indicator stop scrolling and all segments are displayed, the battery is fully charged.
Talk and Standby times Battery operation times depend greatly on how you use the phone, as well as on the coverage of the network and network parameters set by the wireless service provider. Typical times are shown in the table. Talk Time Standby Time 100 minutes 30 hours Battery Low warning The phone says BATTERY LOW and gives a warning tone when the battery charge is low and only a few minutes of talk time remain.
Removing the Battery 1 2 Note: Switch off the phone’s power before removing the battery! 1 Slide the battery cover down slightly, then lift it off. 2 Lift the battery out. Important Battery information • Use only batteries and chargers approved by the phone manufacturer. • When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life.
• • • • • • • connection of the + and - terminals of the battery (metal strips on the side of the battery), for example, when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, reduces the capacity and lifetime of the battery. Always try to keep the battery between 59°F and 77°F (15°C and 25°C).
5. The Basics Opening the phone To prolong the life of your phone, hold it in one hand while opening the cover with the other hand. Switching the Phone on and off • Press the PWR key for about one second. If Keyguard is active, you need to deactivate it before you can turn the phone off. If the display shows LOCKED, press MENU and enter your 4-digit lock code. Welcome note Your dealer may have stored a welcome note in your phone (such as the dealer’s name). If not, your phone number is displayed.
Making a call 1 Extend the phone’s antenna fully. 2 Enter the area code (if needed) and the phone number, then press SEND. If you make a mistake dialing, press CLR to erase digits one by one. Press and hold CLR or press END to clear the whole display. A phone symbol appears on the display. The call is connected when the phone number disappears from the display and CALL appears. CALL For international calls: You can enter a ‘+’ at the beginning of a number by pressing !!.
TIPS ON EFFICIENT OPERATION: Extend your antenna fully when in calls. As with any other radio transmitting device, avoid unnecessary contact with the antenna when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
• To answer the call while using the headset (HDC-3P), press the answer/end button on the headset cord, or press SEND on the keypad. Make sure the antenna is fully extended during the call. Note: If Keyguard is active, a call can only be answered by pressing SEND, including when you are using the headset. When there is an incoming call CALL flashes on the disCALL play and the LED indicator flashes. The phone’s ringing sound (and vibration) depends on the Profile you’re using.
details, see “Availability of network services” on page 63 and “Calling Line Identification” on page 63. Adjusting the earpiece volume • During a call, press quickly to increase the volume, or press and hold to decrease the volume. Or, press or . Last number redial • From the Ready screen, press SEND. The last number dialed appears. Press SEND again to initiate the call. Last 15 Dialed Calls • From the Ready screen, press SEND, then press or repeatedly until you see the number you want.
Emergency 9 dialing The 9 Key is reserved for an Emergency Number that is programmed into your phone by your dealer. • Press the 9 key for about 2 seconds. Emergency 9 Dialing must be set On for this to work! See “Emergency 9 Dialing (Menu 3 7)” on page 38. Note: Official emergency numbers vary by area (e.g., 911 or another official emergency number).
Or, if the phone is ringing and Keyguard is active, you can press and hold PWR to switch off the phone while it is ringing. Making an emergency call with keyguard active • Enter the emergency number preprogrammed in your phone and press SEND. The emergency number shows up on the display after you have entered it completely. Note: When Keyguard is activated, calls may be possible to the emergency number programmed into your phone (e.g., 911 or another official emergency number).
* These items are as you set them using the menu or the volume control. You can set all of the settings in the My tones profile. To select a profile: 1 At the Ready screen, press . again repeatedly 2 Press (or use or ), to move the pointer to the profile you want. 3 Press OK or press and hold to choose it. For profiles other than Normal, the phone displays the profile you are using. (Sometimes the profile name is replaced by a status message like LOCKED).
profiles. When you remove the phone from the Car Kit, the phone reverts to the profile selected before you used the Car Kit. • If a headset is connected to the phone, then the current profile remains selected, but the earphone level is adjusted automatically (and remains selected until the headset is removed). Don’t connect a headset when the phone is in the Advanced Car Kit (you will hear an error tone). • The Vibra Ringing Option will be disabled when the phone is connected to a charger or a car kit.
You can make calling card calls in conjunction with PIN calls. PIN calls ‘PIN Call’ is a network security feature that requires a PIN Code every time you make a call. You can activate or deactivate it and specify the numbers in your PIN Code. Please check with your operator for the availability of PIN Calling in your network. Note: If you are using the phone in an area that doesn’t require PIN dialing, deactivate PIN Call. Activating PIN call 1 Enter * # 7 4 6 2 2 5 5 # (spells PINCALL).
Deactivating PIN call • Follow the steps in “Activating PIN Call”, but don’t enter your PIN Code at the prompt; just press OK. The phone briefly displays PIN CALL OFF. Voice and text messages If you subscribe to voicemail, callers can leave you voice messages which you can recall from your voice mailbox. If you have purchased the Nokia 282 NAMPS version and subscribe to a text message network service, callers may send you short text messages that you can read on your phone’s display.
6. The Phone Book The Phone Book can store up to 75 phone numbers and names. It also has a “notepad” where you can store one additional temporary number and name. The maximum number of Phone Book entries depends on how much information you store in each entry. The more information you store per entry, the fewer entries you can have. The phone holds 75 entries if the average entry size is about 10 digits and 12 characters. This section includes details for using the Phone Book.
Note: If you keep the name short, then the entire entry (both name and number) can fit on one screen. 2 AB JOHN HARRISON 1234567 and move the cursor. CLR backspaces (and erases). To clear the whole display, press and hold CLR. Key 1 press 2 presses 3 presses 4 presses 5 presses 1 1 1 1 1 1 2 A B C 2 A 3 D E F 3 D 4 G H I 4 G 5 J K L 5 J 6 M N O 6 M 7 P Q R S 7 8 T U V 8 T 9 W X Y Z 9 ] Moves the cursor to the next space immediately.
Phone Book location 75 This is a special Phone Book location. If you store a number in location 75, you can make calls to that number even if the phone is locked. See “Lock Phone (Menu 6)” on page 48. Note: Location 75 may not be available if there is no space remaining in the Phone Book. This can happen if other locations contain long names and numbers. Special characters in stored numbers In stored numbers, you can include a 2.
4 Press OK until you see Edit No:. Press !!. The ‘+’ character is displayed after the phone number. 5 Enter the location number (one or two digits) of the Touch Tone string (from Step 2). Store the new contents (phone number, ‘+’, and Touch Tone location). When the phone displays SAVE IN LOCATION? enter the location number from Step 1 and press OK. For details on sending Touch Tones, see “Sending touch tones” on page 60.
Searching by name 1 At the Ready screen, press OK. 2 Find name: and appear. Enter the first letter(s) of the name, then press OK. 3 The nearest match in the Phone Book will be displayed. From here, press or to scroll other entries (unless in a call). Finding an entry by location number If you know the entry’s location number: • Enter the one- or two-digit number (1-75) then press or . For example, to recall the name and number in location 20, enter 2 0 then press .
Moving an entry 1 Recall the name and number. Press OK. 2 At Edit name: press OK, and at Edit No: press OK. 3 At SAVE IN LOCATION?, enter the new location number then press OK. The phone will display MOVE?. 4 Press OK to move or press CLR to exit without moving. Erasing an entry See “Erase Entry (Menu 1 4)” on page 33. Editing an entry See “Edit Entry (Menu 1 3)” on page 31.
7. Menu features The phone’s menus and submenus give you access to many features, including customizing your phone. Instructions for using the menus follow the table.
Accessing the menus Using the “MENU then OK” method 1 Press MENU to enter the menu. 2 Press or to scroll through menu items. 3 Press OK to choose a menu. or to scroll 4 If there are submenus: press through the submenu choices. Press OK to enter a submenu. 5 The current setting is displayed. Press or to scroll through the other choices. Press OK to select one, or press END to exit the menus without changing anything. Some menus require you to enter your lock code or security code.
Also, if you use the shortcut method to access Menu 3 1, there is a 5-second delay before the menu appears. To bypass this delay, press MENU 3 1 OK OK. Using the menu during a call If you press MENU (short press) during a call, the phone gives you the in-call menu (see “In-call menu” on page 57). If you press MENU for slightly longer, you access the regular menu and can use the menu features as you would normally. Phone Book (Menu 1) To access Menu 1, press MENU then OK.
Or: Press MENU then OK. Then press to EDIT ENTRY. Press OK. to scroll to scroll to Find 2 Press Name or Find Loc., then press OK. 3 Either: If you selected Find Name, enter the first letter of the name, then press OK. Or: If you selected Find Loc., enter the location number (1-75) where the entry is stored (or press or to scroll entries), then press OK. 4 The entry is displayed. If this is the entry you want to edit, press OK; if not, press or to scroll to the entry you want to edit, then press OK.
Note: The prompts Edit Name: and Edit No.: are omitted if the name or number occupies more than two lines on the display. Erase Entry (Menu 1 4) Note: Be careful when erasing--it can’t be undone! In this menu, if you choose Erase All, the phone asks you to confirm. Press OK when you see ARE YOU SURE?, or press CLR to exit without erasing. AB ABC One by One Erase all If you choose One by One, the phone displays Erase name:.
number. Press OK. If necessary, press or to scroll to the entry you want, then press OK. TAGGED will be displayed briefly, and you will hear a demonstration ‘fanfare’ ringing tone. If you choose Show VIPs: Press or to scroll the Phone Book entries currently tagged as VIP numbers. If you choose Remove tag: Press or to scroll to the entry you want to untag, then press OK. TAG REMOVED will be displayed briefly. The tagged VIP numbers will be numbered ‘t1’ to ‘t3’ (index number).
Dialed Calls (Menu 2 1) This list contains the last 15 numbers you called or attempted to call. Each of the phone numbers in the list has a number 0L-14L which is shown in the top right corner of the display; “L” stands for last dialed. Received Calls (Menu 2 2) This list contains the callers’ numbers for the last 15 calls you answered. Each phone number in the list has a number 0A-14A which is shown in the top right corner of the display; “A” stands for answered.
Press OK to erase, or press CLR to exit without erasing. Call Timers (Menu 2 5) Once you select this menu item, use to see the duration of the last call, all calls, and the life timer; and to reach the option to clear the last call and all calls timers (life timer cannot be reset). LAST CALL shows the duration of the last call in hours, LAST CALL minutes, and seconds for the 00:00:13 phone number you are using. If you are in a call, the phone shows the duration of the call in progress.
Ring+Vibra - phone rings and vibrates. Beep+Vibra - phone beeps then vibrates. Beep once - phone beeps once only (no ringing tones). Vibrate - phone vibrates only. Note: This menu sets the ringing options only for the My tones profile. See “Selecting the Profile” on page 18 for the ringing options of the other profiles. Ringing Volume (Menu 3 2) With this menu you choose the ringing volume for the My tones profile.
Note: With Keyguard active, lights are off. However, you if you press the PWR key quickly, lights go on for 15 seconds. Lights On The keypad and display lights are on for 15 seconds after the last keypress, or after you open the cover. If the phone is connected to an Advanced Handsfree Car Kit, the keypad lights remain on permanently when the cover is open, and the display lights remain on 15 seconds after the last keypress. Lights Off The lights are off.
Language (Menu 3 8) This menu lets you choose which language you want the menus and messages to be displayed in: English, French, Spanish, or Portuguese. Phone Number (Menu 3 9) Your phone can have two different telephone numbers. This menu lets you choose which telephone number to use. Note: In order to have two different telephone numbers, you must subscribe to them through your cellular operator(s). Note: If only one phone number is programmed into your phone, you’ll only see that number in this menu.
Active Cover (Menu 3 12) With Active Cover set to On, when an incoming call is alerting, you can answer the call by opening the cover. To prolong the life of your phone, hold it in one hand while opening the cover with the other hand. Note: You can end a call by closing the cover, regardless of whether Active Cover is set to On or Off. Roam Beep (Menu 3 13) With Roam Beep set to On, you hear a beep if the roaming status changes (e.g., if the phone roams from the home system to a non-home system).
4 When the note is complete, press OK. The message SAVED will be displayed. If there is already a Welcome Note, and you don’t want one, save a blank screen. Your phone number will then be displayed instead when you switch on the phone. Security Settings (Menu 4) This menu lets you change your phone’s security and lock codes, which are required for certain functions. You can also reset the phone’s menus to their factory settings.
When you enter this menu, the phone prompts you to enter a new 5-digit security code. Enter it and press OK. When the phone asks you to verify your new security code, key it in again and press OK. Restore Factory Settings (Menu 4 3) This function resets the phone’s menus to their factory settings. Note: The lock code and security code are not changed when you reset the menu settings. Call Settings (Menu 5) This menu lets you set up calling restrictions and store calling card information in your phone.
should it work in? The point of the Carrier Selection menu is to help your phone make the best choice for you. A simple fact to know: All cellular systems are either type “A” or “B”. So your “Home system” is either an “A” or “B” system. To find out your system type, ask your cellular service provider. You need your security code AB to enter this menu. Once you Non-pref. Any have entered the menu, you Home only can choose the option you want (described below).
The following table shows which system the phone attempts to use, and the phone’s display indicators, depending on the menu item selected, and whether or not your dealer has programmed the phone with a Preferred list of systems.
Allowed Calls (Menu 5 1 2) You need your security code to enter this menu. Once you have entered the menu, you can choose the option you want (described below). Press to move the pointer to the option you want. Press OK to select it. Allow all - There are no restrictions on outgoing calls. Nat’l only - You can only make calls within your own country; you cannot make international calls. Local only - You can only make local calls, or calls to toll-free numbers beginning with 1800, 1888, or 1877.
To enter or change calling card information 1 Press MENU then "until you see CALL SETTINGS. Press OK. 2 You’ll see CALLING CARD and the currently selected card. Press OK to change it. to move the 3 Use pointer to None, Card A or Card B, then press OK. When the phone asks for your security code, key it in and press OK. If you select None, the phone briefly displays NO CARD SELECTED, and no card is selected.
5 If phone prompts you to SELECT DIALING SEQUENCE, press OK. Press to scroll through the 4 dialing sequence options, and press OK to choose one: Access No. + Phone No. + Card No. Use for cards that require you to enter a 1-800 or 1-888 access number first, then a phone number after you hear a tone, then a card number after you hear another tone. Access No. + Card No. + Phone No.
Useful Information about Calling Cards Remember, to use the automated method of making calling card calls, you must have entered all the necessary card details and selected the card (using this menu). If only the details for one card are entered, there is no need to use the Select feature. But, if you then add the details of another card, the second card will automatically become the card in use. Only one card can be active at a time. You may enter a card name for each card, but this is optional.
Read Messages (Menu 7 1) The phone automatically stores the last 20 short text messages you have received in the Read Messages list. (You can receive text messages if the network supports this service, and if you subscribe to this service - refer to your service provider for more information). This menu lets you scroll through and read the stored messages. Stored messages remain in the phone's memory when the phone is switched off. The same message isn’t stored twice in the list.
Once you enter this menu, use or to scroll to the message you want to erase. Press OK. When ERASE? is displayed, press OK again. The phone will briefly display ERASED. The list of stored messages is then re-ordered and the next message is displayed. If the list is empty (when you try to erase messages), NO MESSAGES is displayed. Message Alert Tone (Menu 7 3) This menu lets you set the type of alert tone you hear when you receive a text or voice message.
To access the Debit menu, press the MENU key, then press twice to access the Debit menu. Press or to scroll through the menu options. TIMETANK INFO shows you the amount of prepaid talk time you have left in your phone. At the TIMETANK INFO screen, press the OK key, and your phone displays the number of units remaining (indicated as U) as well as the date by which you should redeem another prepaid cellular card. CHECKSUM is a customer service only menu item, used for debit verification.
Making a Call For complete information on making a call, refer to “Making a call” on page 13. Once you have placed a call your phone displays the charge rate of units per minute, as well as a timer which tracks the duration of the call expressed in minutes and seconds. Your phone has a grace period that begins when you make a call and extends for an amount of time set by TRACFONE prepaid service. The grace period exists only on outgoing calls. During the grace period you are not charged for the call.
Answering a Call For complete information on answering a call, refer to “Answering a call” on page 14. Note: Call Waiting may not be available if your phone is in prepaid mode. When you answer a call your phone displays the charge rate of units per minute as well as a timer which tracks the duration of the call expressed in minutes and seconds. After three seconds the charge rate of units per minute is replaced by only the number of units remaining in your phone (indicated as U).
Emergency 9 Dialing For complete information on 9 key emergency dialing, refer to “Emergency 9 dialing” on page 17. When you make an emergency call, the amount of units being used and the duration of the call are not tracked by your phone. Important Note: This means you are not charged for 911 calls. Even when there are no units in your phone, you are able to make 911 calls. Prepaid (Menu 9, 282P only) Your service provider may offer prepaid service compatible with your new Nokia phone.
Saving Your Access Number Before you can add money to your account, you must save the correct access number into your phone. Contact your service provider for the access number. 1 Press MENU 9 4. 2 At SAVE ACCESS NUMBERS, press OK. 3 Press once. 4 At ENTER REPLENISH NUMBER, press OK. 5 At Repl. No:, enter the replenish number given to you by your service provider. 6 Press OK. Adding Money to Your Account 1 Press MENU 9 2. 2 At Card No:, enter your prepaid card number, then press OK.
2 At SAVE ACCESS NUMBERS, press OK. 3 At ENTER BALANCE NUMBER, press OK. 4 At Bal No:, enter the balance number given to you by your service provider. 5 Press OK. Checking Your Prepaid Balance Press MENU 9 1. The balance checking number you saved is automatically dialed. Prepaid Calling Card Note: This feature may not be available in all areas. See your service provider for more information. PREPAID CARD allows you to save a prepaid card number into your phone.
3 At Select press OK. You can also edit or erase your prepaid card number. Making a Call For complete information on making a call, see “Making a call” on page 13. 1 Enter the number you want to call, then press and hold SEND until you hear a tone. 2 At the tone, press OK and the card number you saved is automatically sent to the network. Ending a Call For complete information on ending a call, see “Ending a call” on page 14. • Press END.
Mute - This mutes the phone during a conversation. The phone displays MUTED. To unmute the phone, select the Mute option again. Send DTMF - To send DTMF (Touch Tone) strings during a call, first recall the stored string from the Phone Book. Access the in-call menu with a short press of MENU. Move the pointer to Send DTMF and press OK. The phone sends the DTMF (Touch Tone) string. See “Sending touch tones” on page 60.
8. Data and Touch Tones Data Mode Data Mode can be used when your phone is connected, via a suitable data card and modem, to a laptop or personal computer. You may then use your computer to make and receive calls, and to send and receive data messages such as emails. Follow these steps before using Data Mode: 1 Ensure your phone is switched on, and that the battery has enough charge for the duration of your data calls.
To operate your modem and data card • Refer to the documentation supplied with these items. Sending touch tones Your phone is a ‘Touch Tone’ phone. Touch Tones are the sounds your phone makes when you press the keys. Touch Tones can be used for many automated phone services such as checking your bank balance and using voice mailbox options. Your phone refers to Touch Tones as ‘DTMF’ (Dual Tone Multi Frequency). Manually sending touch tones Pressing the keys during a call sends Touch Tones.
• ‘Waits’ for you to press SEND again. When you do, the phone sends the numbers 1234. • ‘Waits’ for you to press SEND again, then sends the numbers 3434.
Pressing SEND sends a displayed number to the network as a flash, unless it is preceded by a ‘p’ or ‘w’. (In these cases it is sent as a Touch Tone.) After the phone number has been entered, you can add extra information which is for ‘flash’ sending to the network. Contact your service provider for further details.
9. Network Services Availability of network services The network services available depend on the model of your phone, the cellular system (AMPS or NAMPS) on which it operates, and the services offered by your cellular service provider. To be able to use any of the network services, you need to subscribe to the particular service. The service may not be available in all cellular service provider networks. Please contact your local cellular service provider for further information.
Note: If the last seven digits of an incoming caller’s number match the last seven digits of a number stored in the Phone Book, the phone displays the stored number/name even if the area code or other dialing prefix is different. The number is then stored in either the Received Calls list or the Missed Calls list, depending on whether you answer the call or not. Call Waiting Call Waiting lets you know you have an incoming call while you already have a call in progress.
Message Waiting (Voicemail) Message Waiting lets you know you have unheard voice mail messages in your voice mailbox. The method of notification varies from one network to another. If you receive voicemail: • the voicemail indicator lights, • NEW VOICE MESSAGE or ‘n’ NEW VOICE MESSAGES may be displayed, indicating the number (n) of unread messages, • the index number may show the number of unread messages, and • you may hear a message-received tone.
When you receive a message: • the text message indicator lights. • the note MESSAGE RECEIVED or ‘n’ MESSAGES RECEIVED or a callback number may be displayed. • the message alert tone may be heard (to stop the long tone, press any key except PWR or or ). • the message is stored automatically in the Messages list. To read a message when MESSAGE RECEIVED or ‘n’ MESSAGES RECEIVED is displayed: • Press OK, or or . To scroll other stored messages, press or .
Short Message Service (SMS) Callers can send you short pre-defined messages, such as CALL HOME. Contact your local service provider for information. Callback Number Service Caller’s can send you their callback numbers. Contact your local service provider for information. Note: If the number received matches a number and name stored in the Phone Book the name will be displayed instead. To call the number received: • With the number (and message) displayed, press SEND.
10. Accessories An extensive range of accessories is available for your phone. You can select the accessories that best suit your specific communication needs. For availability, please check with your local dealer. A few practical rules for accessory operation: • Keep the accessories out of small children's reach. • When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. • Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
The chargers and some of the other accessories available for your phone are described in this section. Please refer to your dealer for further information. Also, refer to any accessory options manual that may have been included in your sales package for the entire range of Original Nokia accessories. Note: When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life.
For charging times and other battery information, see “Battery Information” on page 7. Note: If the battery is completely discharged, you cannot use the phone until it has enough charge to operate. The Standard Travel Charger is available for different voltage levels. ACP-9U Rapid Travel Charger The extremely light, functionally designed Rapid Travel Charger charges your phone battery quickly. Plug the charger into a wall outlet and plug the connector (on the charger lead) into the bottom of your phone.
This small charger's functional design fits well with most car cigarette lighters. Charging Times are the same as for the Rapid Travel Charger ACP-9U. For charging times and other battery information, see “Battery Information” on page 7. Calls can be made while charging. A green light indicates that the Rapid Cigarette Lighter Charger is ready to charge. Check the charging status on the phone display. The input voltage is 12 or 24 V DC, negative grounding.
The charging status of the phone battery is shown on the phone display. The charging status of the spare battery is shown on the LED indicator on the stand - it will be red when charging, and green when charged. For best performance, it is recommended that you use the Compact Desktop Charging Stand with the Rapid Travel Charger ACP-9U. BCP-5 Belt Holster The Belt Holster lets you easily wear your phone.
11. Reference Information Important Safety Information Traffic Safety Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
• • • • Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on; Should not carry the phone in a breast pocket; Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, switch off your phone immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids.
Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies). Remember, to make or receive any calls, the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.
of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.
Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phone, battery, charger, OR any accessory: • Keep it and all its parts and accessories out of small children’s reach. • Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
12. Troubleshooting If the power does not come on or stay on: • Make sure the battery is properly installed and charged. • Be sure that the contacts on the battery and the charging stand are clean. • Battery charge may be too low for operation. Check the display and listen for the low battery warning tones. If the power comes on, but the phone does not work: • If the phone displays NO SERVICE, you’re out of the service area and you can’t make calls.
13. Technical Information Weight: 4.5 oz. (127g) Transmitting power: 0.6 watt max ERP Operating voltage: 3.6V dc 12V dc for car kit Frequency band: 824.040 to 848.970MHz (TX) 869.040 to 893.970MHz (RX) Number of channels: 823 (NAMPS 2412) Phone Book capacity: Up to 75 locations (see Note). Note: The maximum number of Phone Book entries depends on how much information you store in each location. See “The Phone Book” on page 23.
14. Warranty NOKIA One-Year Limited Warranty Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. 2.
6. The Consumer shall bear the cost of shipping the Product to NMP in Melbourne, Florida. NMP shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty. 7.
b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to: Nokia Mobile Phones, Inc. Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL. 32901 c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable).
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
13. This is the entire warranty between NMP and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, and all communications relating to the Product, and no representation, promise or condition not contained herein shall modify these terms. 14. This limited warranty allocates the risk of failure of the Product between the Consumer and NMP. The allocation is recognized by the Consumer and is reflected in the purchase price of the Product. 15.
15.
E messages alert tone 50 erasing 49 menu 48 reading 49 text message indicator 5 voice and text 22 voicemail indicator 5 missed calls list 35 My tones profile 18 emergency 9 dialing 17, 38 emergency calls 17, 76 making 76 with keyguard active 18 F flash function 61 H house indicator 5 N I network services 63 NO SERVICE 13, 43, 79 Normal profile 18 notepad memory 27 in-call menu 57 indicators AB 5 ABC 5 O K overflow indicator 5 Keyguard 17 keypad tones 37 P phone book 23–28 editing an entry 31 er
phone indicator 5 phone number 39 PIN calls 21 pointer 5 preferred network 43 profile selecting 18 useful information about 19 S Q T Quiet profile 18 touch tones 58, 60 R V ready screen 4 received calls list 35 RECHARGE BATTERY 9 redial automatic 39 last 15 dialed calls 16 last number 16 REPLACE? 23, 32 restore factory settings 42 ringing options 36 tone 37 volume 37 roam beep 40 VIP entry menu 33 VIP feature 28 voicemail 15, 65 indicator 5 volume earpiece 16, 18 ringing 18, 37 safety guidelines 1
