User manual
Table Of Contents
- Keys and the Display
- Contents
- 1. Important Safety Information 1
- 2. The Battery and SIM Card
- 3. The Basics
- 4. For Your Convenience. . .
- 5. Voice and Text Messages
- 6. The Memory
- 7. Touch Tones
- 8. The Menu
- Menu Summary
- Menu 01, Recent Calls
- Menu 2, Messages
- Menu 3, Call Forwarding
- Menu 4, Phone Settings
- Menu 5, Security Options
- Menu 6, Duration and Cost
- Menu 7, Phone Line Selection
- Menu 8, Memory Functions
- Menu 9, Personal Reminders
- Menu 10, In-Call Options
- Menu 11, Fax or Data Call
- Menu 12, Number Editor
- Menu 13, Ringing Options
- Menu 14, Quick Guide
- 9. Accessories
- Batteries
- Rapid Travel Charger (ACH-4U)
- Rapid Cigarette Lighter Charger (LCH-2)
- Light Desk Stand (CHH-2L)
- Compact Desktop Charging Stand (CHH-2)
- Handsfree Desktop Charger Kit
- Mini Headset Car Kit (CARK-83)
- Mobile Holder (MBH-6)
- Compact Handsfree Car Kit (CARK-10P)
- Belt Clip (BCC-1)
- Accessories for Data Communications
- 10. Care and Maintenance
- 11. Technical Data
The phone sounds an alarm and displays COUNTDOWN
COMPLETED when it finishes counting down the amount
of time you enter. The timer stops if the battery runs out
or if you turn the phone off.
To Stop the Timer Before it Alarms
Follow the steps above, but key in 0000 at Set
timer:.
To Clear the Alarm When it is Sounding
Press OK or any key.
Menu 10, In-Call Options
These are options to be used during calls.
Press and hold the Menu key during a call to access
this menu.
Press ▼ to get to the option you want (Mute,
Unmute, Hold, Unhold, Swap, Drop Call, Send
DTMF, Join, Private), then press OK.
Mute or Unmute switches off or on the phone’s
microphone. If the phone is connected to a handsfree
desktop charger, Mute turns off the microphone of this
accessory.
Hold allows you to put a currently active call on hold.
Once the new call has been terminated, you can make
the original call active again by selecting Unhold.
Swap makes a held call active and puts the currently
active call on hold.
Note: The Hold/Unhold and Swap options appear only
if supported by your operator and SIM card.
Drop Call ends the currently active call.
Send DTMF transmits the numbers on the display as
Touch Tones. If there are no numbers on the display,
the phone prompts you to enter a location number.
Enter a location number or use the ▼ or ▲ keys to
50