User manual

45
To call unlocked memory locations while
Auto Lock is on
There are four different ways you can do this:
1. Press and hold
ù to go to the start screen. Press
W or V to desired unlocked location, then press ó.
2. Enter number as it is stored and press
ó.
3. Press desired unlocked location (either 2, 3, or 4)
and press
ó.
4. Press and hold the desired unlocked location.
To turn Auto Lock off
Use Menu 5 1 and your lock code
To change your lock code (Menu 5 2)
You can change your lock code with your phones menu.
Its recommended that you change your code immediately
because the default lock code (1234) appears in this
owners manual. In a lock code, only characters 0 to 9,
∗
and # are accepted.
Changing the lock code is simple. Just press
0HQX 5 2 and
follow the prompts to do this. Make sure you have your
security code handy. Youll need it to change the lock
code.
Note: Avoid entering access codes similar to emergency numbers
to prevent accidental emergency calls.
To change your security code (Menu 5 3)
The default security code for your phone is 12345. Its
recommended that you change this code immediately.
Just press
0HQX 5 3 and follow the prompts to do this, and
make sure you write the new code down and store it away
from your phone.
Menu 5 4, Restrict Calls
This feature allows you to restrict outgoing calls from your
phone. You can select the level of restrictions through a
series of menu choices.