User manual

33 Copyright © 2004 Nokia
Advanced calling features
Note: Use caution when sending confidential information if voice privacy is not active.
p Creates a pause when a number is dialed. The numbers you enter after this special
character are automatically sent as touch tones after a 2.5-second pause.
w Creates a wait when a number is dialed. Your phone waits for you to press the Left
selection key before it sends the number as touch tones.
*
Sends command strings to the network. Contact your service provider for details.
+ Links a 1-touch dialing number to a number in the phone book.
Set manual touch tones
1 From the menus, select Settings > Phone settings > Touch tones > Manual touch tones.
2 Select one of the following options:
Continuous—Sound the tone for as long as you press and hold a key.
Fixed—Set the tone to a fixed length, regardless of how long you press a key.
Off—Turn off the tones. No tones are sent.
Set touch tone length
You can also set the length of each touch tone.
1 From the menus, select Settings > Phone settings > Touch tones > Touch tone length.
2 Select either Short (0.1 second) or Long (0.5 second).
Store touch tone strings
You can store touch tone strings the same way that you store names and numbers in your
phone book. You can store an entire sequence of digits and send it as touch tones for
frequently used strings of numbers.
1 Enter the phone number that you want associated with a touch tone.
2 Enter the touch tone character where needed (p, w, or *).
3 Enter the touch tone string.
4 Store the number as you normally would.
Send a touch tone string
1 From the menus, select Settings > Phone settings > Touch tones > Manual touch tones.
2 Select either Continuous or Fixed (not Off).
3 During the call, select Options > Touch tones.
4 Enter the touch tone string or recall the string from the phone book, and select OK.
If you send touch tones while in the analog mode, be careful not to send confidential
information.