User guide

5
Programming Your Remote
Your remote is initially programmed to only operate your receiver. Therefore,
you must program the remote to operate your TV, DVD player, or other devices.
Note: You must use the IR (infrared) remote within line of sight of the receiver for
the receiver to operate correctly.
HOW DOES YOUR UNIVERSAL REMOTE CONTROL WORK?
You tell the remote which device you want to operate using the four keys, called mode keys, arched across the top of the remote
on each side of the Power button. These keys are labeled STB, TV, DVD, and AUX. Each mode key is associated with a specific
device. For example, after programming the remote, to operate your TV you simply press the TV key. Other keys you press on
the remote, thereafter, should operate your TV. To operate a different device, just press the mode key for the next device you want
operate.
AUTO-SEARCHING THE CODE LIBRARY FOR TV OR DVD MODE CODES (PROGRAM CODE 922)
Note: This procedure only applies to TVs and DVDs. Once one is programmed, program the other using the same steps and a
different mode key.
1. Turn on the device that you want to assign to the TV or DVD key.
2. Point the remote at the device.
3. Press and hold a selected mode key (TV or DVD), then press the OK key. For example, to search for a TV code, press and hold
TV and OK at the same time.
4. Release both keys and all the mode keys blink twice.
5. Enter the programming code 9 2 2 by pressing the numeric keys on the remote. The mode key you selected in step 3 blinks
twice to indicate a successful entry.
6. Point the remote toward the device, and press PLAY.
7. Your device powers off when it finds the correct code. Then, choose one of the following options:
• Save code and exit – Press the ENTER key on the remote to program the code in the remote and the mode key flashes three
times indicating successful entry.
To program more devices, please call Product Support at 886-3900.