User guide

17
Display Settings
SCREEN ASPECT RESOLUTION
Using your TV’s user guide as a reference, you can adjust your screen settings
by choosing the most suitable resolution from this list and then following steps 1 to 8:
• 4:3 standard definition
• Widescreen standard definition
• 720p High Definition
• 1080i High Definition
1. Press (MENU).
2. Use (RIGHT ARROW) to highlight Settings.
3. Use (UP/DOWN ARROWS) to select Television and press (OK).
4. Use (UP/DOWN ARROWS) to select Screen aspect ratio and High Definition and press (OK).
5. Use (UP/DOWN ARROWS) to select the setting that is appropriate for your TV.
6. Navigate to Continue and press (OK).
7. Navigate to Start test and press (OK). The system will verify whether your TV can display the selected setting.
8. If you can see the video on your screen, use (UP/DOWN ARROWS) to select Keep setting and press (OK)to save.
Or, if you see a black screen, your TV may not be able to display the selected setting or it may not be properly connected to your
digital receiver. Use (UP/DOWN ARROWS) to choose another setting or check your cables to ensure proper connection between
your TV and digital receiver.
Quick tip: To remove the black bars that appear on both sides of the screen when you watch standard definition programming on an
HDTV, press (ENTER OPTIONS) and use (UP/DOWN ARROWS) to select the optimum setting for your TV.
DESCRIPTIVE VIDEO
Descriptive video is a feature available on select programs for the visually impaired that provides audio descriptions of the visuals in
a program.
1. Press (MENU).
2. Use (LEFT/RIGHT ARROWS) to select Settings.
3. Use (UP/DOWN ARROWS) to select Audio and press (OK).
4. Use (UP/DOWN ARROWS) to select Audio description and press (OK).
5. Use (UP/DOWN ARROWS) to select Descriptive video and press (OK).
6. Navigate to select Save and press (OK).
DIGITAL AUDIO OUTPUT
Digital audio output allows you to adjust your audio settings.
1. Press (MENU).
2. Use (LEFT/RIGHT ARROWS) to select Settings.
3. Use (UP/DOWN ARROWS) to select Audio and press (OK).
4. Use (UP/DOWN ARROWS) to select Digital audio output and press (OK).
5. Navigate to select Stereo or Surround sound and press (OK).
6. Navigate to select Save and press (OK).