User Guide

2
-
20 Primer: How to Optimize a Desi
g
n
To update the diode schematic with the current
parameter values
1
From the Edit menu, select Update Schematic.
Recall that R1Val was initially set at 5.0 k in the schematic
file. When you select Update Schematic, the PSpice
Optimizer sends a message to Schematics to update the
schematic file. Schematics writes the new parameter value
of 3.9 k to the OPTPARAM symbol on the schematic (as the
current value).
Figure 2-10 shows the updated schematic for the diode
design.
Fi
g
ure 2-10
Updated Diode Schematic